6558
35
Zoom out
Zoom in
Previous page
1/44
Next page
31
ENGLISH
OTHER FUNCTION
ATTENUATION TO ANALOG INPUT SIGNAL
When the input signal is too high and the voice distorts even by
throttling the SR4300 VOLUME control, turn on this function. ATT is
indicated when this function is activated.
ATT indicator will light up when this function is activated. The signal-
input level is reduced by about the half. Attenuation will not work with
the output signal of TAPE-OUT, CD-R/MD-OUT, VCR1-OUT and
DSS/VCR2-OUT.
This function is memorized for each individual input source.
LISTENING OVER HEADPHONES
This jack may be used to listen to the SR4300s output through a pair
of headphones. Be certain that the headphones have a standard 1/4"
stereo phone plug. (Note that the main room speakers will
automatically be turned off when the headphone jack is in use.)
Notes:
When using headphones, the surround mode will automatically
change to STEREO.
The surround mode returns to the previous setting as soon as the
plug is removed from the jack.
DIMMER
You can change the display brightness of the front display.
Press the DIMMER button on the front panel to change the brightness.
When this button is pressed, the brightness is changed in the following
sequence.
dimmed Display Off normal dimmed ....
Note:
Only DISP indicator will light up on the front display in display
off condition
SELECTING ANALOG AUDIO INPUT OR
DIGITAL AUDIO INPUT
If you have already assign any digital input to input source.
You can select temporarily the audio input mode for each input source
with the A/D button on the remote controller or front panel.
When this button is pressed, the input mode is switched in the
following sequence.
Digital Auto Digital Analog Digital Auto....
In Digital Auto mode, the types of signals being input to the digital and
analog input jacks for the selected input source are detected
automatically.
If no digital signal is being input, the analog input jacks are selected
automatically.
In Digital mode, input is fixed to an assigned digital input terminal.
In analog mode, the analog input jacks are selected.
This selecting is temporarily, so the result will not be stored in memory.
If you need to change input mode completely, use SYSTEM SETUP in
SETUP menu system. (see page 19)
RECORDING AN ANALOG SOURCE
In normal operation, the audio or video source selected for listening
through the SR4300 is sent to the record outputs.
This means that any program you are watching or listening to may be
recorded simply by placing machines connected to the outputs for
TAPE OUT , CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT in the
record mode.
To record the input source signal you are currently watching or
listening to
1.
Select the input source to record by pressing the corresponding
input selector button.
The input source is now selected and you may watch or listen to it
as desired.
2.
Outputs the currently selected input source signal to the TAPE
OUT , CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT outputs
for recording.
3.
Start recording at the recording component as desired.
Notes:
If you change the input source during recording, you will record
the signals from the newly selected input source.
You cannot record the surround effects.
Digital input signals are only output to the digital outputs. There
is no conversion from digital to analog .
When connecting CD players and other digital components, do
not connect only the digital terminals, but the analog ones as
well.
CLEAR TUNING/
P
MEMORY
PHONES
STANDBY
POWER ON/STANDBY
S-DIRE
C
HT-EQ
DSS/VC
R
DVD
TV
A/D
6.1CH-IN
VCR1
PHONES
CLEAR
F/P
MODE
TUNING/PRESET
MEMORY
PHONES
SURROUND
AV SURROUND RECEIVER SR4300
STANDBY
POWER ON/STANDBY
MUTE
S-DIRECT
HT-EQ
DSS/VCR2
DVD
CDR/MD
TAPE
CD
T
TV
A/D
DIMMER
6.1CH-IN
VCR1
1.
SYSTEM REMOTE CONTROLLER RC4300SR
VCR1
DVD
TAPE
MD
CHANNEL/SKIP
ATT.
TV
CDR
CD
AMP
TUNE/SEARCH
NIGHT
TUNER
MODE
DISP./RDS
PTY
P.SCAN
VCR2
DSS
VCR1
DVD
TAPE
MD
TV
CDR
CD
AMP
TUNER
VCR2
DSS
1.
SYSTEM REMOTE CONTROLLER RC4300SR
VCR1
DVD
TAPE
MD
ATT.
CD
AMP
TUNER
MODE
DISP./RDS
PTY
P.SCAN
VCR2
DSS
ATT.
CLEAR
F/P
MODE
TUNING/PRESET
MEMORY
PHONES
SURROUND
AV SURROUND RECEIVER SR4300
STANDBY
POWER ON/STANDBY
MUTE
S-DIRECT
HT-EQ
DSS/VCR2
DVD
CDR/MD
TAPE
CD
TUNER
TV
A/D
DIMMER
6.1CH-IN
VCR1
UP
VOLUME
DOWN
DIMMER
CLEAR
F/P
MODE
TUNING/PRESET
MEMORY
PHONES
SURROUND
AV SURROUND RECEIVER SR4300
STANDBY
POWER ON/STANDBY
MUTE
S-DIRECT
HT-EQ
DSS/VCR2
DVD
CDR/MD
TAPE
CD
TUNER
TV
A/D
DIMMER
6.1CH-IN
VCR1
A/D
OFF
TREBLE
OK
CS
2
BASS
1
4
8
5
9
6
3
7
0
MENU
AUTO
DTS
DSP
6.1CH
-IN
2CH
EX/ES
M-CH
ST
A/D
SETUP/T.TONE
S-DIRECT
F.DIRECT
0
A/D
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR-4300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR-4300 in the language / languages: English as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz SR-4300

Marantz SR-4300 User Manual - English - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info