6552
16
Zoom out
Zoom in
Previous page
1/22
Next page
13
ENGLISH
USING THE SLEEP TIMER
To program the SR4021 for automatic standby, press
the SLEEP button on the front panel or press the
SLEEP button on the remote.
Each press of the button will increase the time before
shut down in the following sequence.
OFF 10 20 30 40
90 80 70 60 50
The sleep time will be shown for a few seconds in the
display on the front panel, and it will count down until
the time has elapsed.
When the programmed sleep time has elapsed, the
unit will automatically turn off.
Note that the SLEEP indicator on the display will
illuminate when the Sleep function is programmed.
To cancel the Sleep function, press the SLEEP
button until the display showsSLEEP OF (SLEEP
OFF)” and the SLEEP indicator will disappear.
LISTENING THROUGH HEADPHONES
This jack may be used to listen to the SR4021’s
output through a pair of headphones. Be certain that
the headphones have a standard 1/4" stereo phono
plug. (Note that the speakers will automatically be
turned off when the headphone jack is in use.)
SPEAKERS
DISPLAY OFF
2
1
BASS
CLEAR
M
E
T
CDPHONO
MULTI JOG
RECEIVER SR4021
SLEEP DIMMER
STANDBY
PHONES
POWER ON/OFF
PHONES
RECORDING A SOURCE
In normal operation, the audio or video source
selected for listening through the SR4021 is sent to
the record outputs.
This means that any program you are watching
or listening to may be recorded simply by placing
machines connected to the outputs for RECORDER1
OUT, RECORDER2 OUT, and VCR OUT in the
record mode.
To record the input source signal you are currently
watching or listening to
RECORDER
F/PBAND
BALANCE SPEAKERS
2
SPEAKERS
DISPLAY OFF
2
1
BASS
TREBLE
VCR
T-MODECLEAR AUTO TUNEMEMORY
1
DVDDSS21 AUXTUNERCDPHONO
1.
Select the input source to record by pressing
the corresponding input selector button.
The input source is now selected and you may
watch or listen to it as desired.
2.
The currently selected input source signal is
output to the
RECORDER 1 OUT, RECORDER 2
OUT, and VCR OUT outputs for recording.
3.
Start recording to the recording component as
desired.
Recording the video from one source and the
audio from another
You can add the sound from one source to the
video of another source to make your own video
recordings.
Below is an example of recording the sound from
a compact disc player connected to CD IN and the
video from a video camera connected to AUX IN to
video cassette recorder connected to the VCR OUT
jack.
RECORDER
F/PBAND
BALANCE S
P
SPEAKERS
DISPLAY OFF
2
1
BASS
TREBLE
VCR
CLEAR
AUTO TU
N
MEMORY
1
21 AUXTUNERCDPHONO
2.
1.
1.
Press the AUX input source button to set video
output.
2.
Press the CD input source button to set audio
output.
3.
Now “CD” has been selected as the audio input
source and “AUX” as the video input source.
Notes:
If you change the input source during recording, you
will record the signals from the newly selected input
source.
The setting of BALANCE, BASS, TREBLE,
VOLUME, MUTE does not affect the recorded
material.
• A given input source does not output on the same
OUT channel (For example, the signal input from
VCR IN is not output on VCR OUT).
If you playback a video source that uses scrambled
or encoded signals to prevent it from being dubbed,
the picture itself may be disturbed due to those
signals.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR-4021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR-4021 in the language / languages: English as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info