522856
20
Zoom out
Zoom in
Previous page
1/40
Next page
ENGLISH
ENGLISH
18
The disc fails to rotate.
1. Is the mains lead plugged in properly?
2. Is the POWER switch ON?
3. Is the disc placed in the correct position on the disc tray?
4. Is the disc placed properly with the label side facing up?
5. Is the disc dirty?
6. Is the disc scratched?
7. Is the disc warped?
The disc is rotating but no sound is heard.
1. Are the amplifier and speakers connected properly?
2. Is the amplifier switch ON?
3. Is the amplifier’s function or selector switch set to “CD” or
“AUX” or such (to whatever you have connected this unit
to)?
4. Is the amplifier’s volume control set at the minimum level?
The disc stops in mid-operation.
The sound drops out or noise is heard.
1. Is the disc dirty?
2. Is the disc scratched?
3. Is the disc warped?
* In the case of a CD-R or CD-RW disc, this problem may
occur when the conditions under which its data was
originally written were substandard or when the quality of
the disc itself is poor.
* This condition may occur in Mixed-Mode CDs, CD Extra,
and other discs that have CDDA format mixed with other
data.
Noise may also be heard momentarily when skipping
tracks.
Remote control operation is not possible.
1. Is the transmitter of the remote control unit (RC8400SA)
pointed correctly at the remote sensor on the front of the
player (this unit)?
Or is there an obstruction between the transmitter and the
remote sensor?
2. Are the batteries in the remote control unit exhausted?
3. Is there another strong light (from a window, etc.) striking
the Super Audio CD player’s remote sensor?
TROUBLE SHOOTING
A Super Audio CD cannot be played.
1. Is the disc scratched, dirty or warped?
2. Is the amplifier’s input selector set to digital?
* Digital audio signal will not be output when a Super Audio
CD is played.
3. Is the disc a Super Audio CD multi-channel only disc? (This
unit does not support Super Audio CD multi-channel.)
A CD-R/CD-RW disc cannot be played.
1. Is the disc placed upside down?
2. Is the disc contains properly written TOC?
3. Is the recorded information in an audio (CD-DA) format?
A specific CD cannot be played
Copy control CDs (CDs with copy guard) are special discs
that do not comply with current CD standards. Marantz
cannot guarantee the ability to play such discs on your CD
player.
When normal CDs can be played without a problem and
problems occur only when playing these special discs, it
is not a problem with this unit.
Please ask the seller of the copy control CD for detailed
information regarding copy control CDs.
The unit makes a clicking sound when the tray closes
This is the adhesion click of the clamper for securing the
disc. This does not cause any problem in using the unit.
While the disc is spinning, a spinning sound is heard
or a slight vibration occur.
Depending on the disc, a spinning sound may occur or
the unit may vibrate slightly due to disc eccentricity or such.
This is not a problem with this unit.
If you think a malfunction has occurred, first check the points listed below. The problem is likely to have been caused by a simple
operational error or a connection problem. If the problem cannot be corrected even after carrying out the following checks,
consult your dealer or nearest Marantz sales office or service counter.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SA8400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SA8400 in the language / languages: English as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info