37769
22
Zoom out
Zoom in
Previous page
1/29
Next page
18
ENGLISH
OPERATION
To Check the Programmed Tracks
Press the
RECALL/SCROLL
button on the remote control during
the program or when the program is stopped (PROG lights
up).
Every time press
RECALL/SCROLL
button, the programmed
tracks will be displayed one after the other in order.
To Delete a Programmed Track
q
Press
CANCEL
button in stop mode when program
has been
made (When PROG indicator is lighting up).
w
Every time press
CANCEL
button, the programmed
tracks
are deleted in order from the last track programmed.
Also, the deleted tracks track number indicator will
disappear.
To Clear Whole Program
Press
STOP
button two times while in program play. In the
stop mode, press
STOP
button once.
Program can also be cleared by pressing
OPEN/CLOSE
key
to open the disc tray.
To Add Tracks to Program
Tracks can be added to the end of program when program is
remaining (PROG indicator is lighting up) and in stop mode.
However tracks cannot be added to the program when the
RNDM (random) indicator is lit up.
* Please be careful about the following matters.
When programming 1st through 9th tracks in a disc that
has over 10 tracks by using numeric buttons. For instance,
programming the 3rd track after programming the 1st track,
press 3 button more than approximately 1.5 seconds after
1 button is pressed. When a program is finalized, the time
is updated.
Likewise, when programming a track at 10th or after. For
example, to program 13th track, press 3 button within
approximately 1.5 seconds after 1 button is pressed.
When programming a track in a disc that has less than 9
tracks. For instance, to program the 5th track after 4th track
has been programmed, press 5 button more than
approximately 0.5 second after 4 button is pressed.
Q&A
How many tracks can be programmed?
Up to 30 tracks can be programmed for program play.
Can I listen to program play repeatedly?
Press
REPEAT
button once. ALL indicator will
light and program play will be repeated.
Can I shuffle the programmed track order?
Press
RANDOM
button in stop mode.
SEARCHING YOUR FAVORITE TRACKS
(AMS (AUTOMATIC MUSIC SCAN) PLAY)
This feature is convenient to search where your favorite track
is.
If the
AMS
button is pressed while a track is stopped, the
AMS indicator lights up, and the first ten seconds of each track
on the disc will be played starting from the first track.
Also, if the
AMS
button is pressed during playback, the AMS
indicator lights up, and the program jumps to the next track
after approximately 10 seconds elapses on the display time.
Once you find a song that you want to listen to, press the
AMS
button again or press the
PLAY
button. The AMS indicator
turns off, and normal playback resumes from the current track.
* If the
AMS
button is pressed after the tracks are programmed,
only the programmed tracks are played by AMS.
Light up
SA-7S1 N 01 eng 06.8.29, 1:29 PMPage 18 Adobe PageMaker 6.5J/PPC
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SA7S1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SA7S1 in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info