37758
13
Zoom out
Zoom in
Previous page
1/18
Next page
9
ENGLISH
OPERATION
* In this instruction manual, some operations can only be performed with the remote control. For
operations that can be performed with buttons both on the main unit and on the remote control, the
button names are shown in the mark. And for operations that can only be performed with
buttons on the remote control, the button names are shown in the mark.
CONNECTING THE POWER
SUPPLY
1 Plug the power cable into AC IN jack on the back
panel.
2 Turn on the power switch of the audio unit
(amplifier, etc.) that is connected with this unit.
Set the selector on the connected unit to this unit.
3 Plug the power cable into an AC outlet.
NORMAL PLAYBACK
7 Super Audio CD player playback
SOUND MODEDISPLAY
SUPER AUDIO CD PLAYER SA7001
PROG
ALL TOTAL SING
AMS
REMAIN SACD
RNDM TRK
A
B
1
1
TEXT
2 34 56 7891011 12 1314 1516 1718 1920
STEREO
q r
w, e
q Press POWER switch to turn on.
Display
The display cycles from TOC Reading No
Disc (when no disc is loaded) Super Audio
CD (when the start sound mode setting is Super
Audio CD).
w Press the
OPEN/CLOSE
button
The disc tray comes out. Place the disc with label
side up on the tray.
To play a single (8cm) CD, place the disc with
the indentation at the center of the tray.
e Press
OPEN/CLOSE
button.
r Press
button.
Disc type is automatically detected and playback
is started. Track number and track elapsed
time(minute, second) appear on the display.
* For Super Audio CD/CD hybrid-layer discs (See
page 2), the layer that is set in the start sound
mode (See page 10) is played. To change the
layer, use the
SOUND MODE
button. (See page
9)
(Exp.:Track 6, Elapsed time 2 min 8 sec)
PROG ALL TOTAL SING
AMS
REMAIN SACD
RNDM TRK A – B
1
1TEXT 2
34 5 6 78 910 11 12 13 14 15 16 17 18 19 20 STEREO
Playback automatically stops at the end of the
final track.
Number of current track
Minutes Seconds
Remaining track numbers
To start playback form the first track
Press
PLAY
button.
To stop playback
Press
STOP
button.
To eject disc
Press
OPEN/CLOSE
button to open the disc tray
and take the disc off. Press the button again to close
the tray.
Disc tray must be closed when the unit is not be
used.
To pause playback
Press
button.
PAUSE indicator will light and playback is paused at
the point that the button is pressed. To restart
playback, press
button again or press
PLAY
button.
To change time display
Press the
TIME
button on the remote control.
Each time
TIME
button is pressed, display will
change in the following order. Track elapsed time
Track remaining time Total remaining time
Track elapsed time.
Track remaining time
(The remaining playing time from the playing
point to the end of the current track)
PROG ALL TOTAL SING
AMS
REMAIN SACD
RNDM TRK A B
1
1TEXT 2
34 56 78 910 11 12 13 14 15 16 17 18 19 20 STEREO
Total remaining time
(The remaining playing time from the playing
point to the end of the last track)
PROG ALL TOTAL SING
AMS
REMAIN SACD
RNDM TRK A B
1
1TEXT 2
34 56 78 910 11 12 13 14 15 16 17 18 19 20 STEREO
* If
TIME
button is pressed when Super Audio CD
disc that supports text is in use, time display is given
priority and the text information will not be displayed
afterward. To see the text information, press
TEXT
button.
7 Switching Sound Mode
(Super Audio CD)
q Press
SOUND MODE
button in stop
mode (not playing).
The currently selected layer or area is shown on
the display. (CD or Super Audio CD)
If
SOUND MODE
button is pressed again, a
playable layer or area will be shown, and the layer
or area will be switched to new one.
* When layer or area is switched, TOC will be
read again.
* The sound mode cannot be changed for Audio
CDs and discs with only a Super Audio CD
area.
* The sound mode on hybrid layer discs will be
changed in the following order.
Super Audio CD stereo area CD layer
Super Audio CD stereo area
* Sound mode can be selected while the tray is
open. Select a desired layer or area and press
PLAY
button then the tray will close and
playback will be started.
w Press the
SOUND MODE
button
during playback.
The currently selected layer or area is shown on
the display. (CD or Super Audio CD)
If
SOUND MODE
button is pressed again, the
playback is stopped, and the layer or area will
be switched to new one.
When you want to listen at that area, press
PLAY
button again. The playback will be
started.
“–” is displayed
SING REMAIN is displayed
“–” is displayed
TOTAL REMAIN
is displayed
AC IN
SOUND MODEDISPLAY
SUPER AUDIO CD PLAYER SA7001
PROG
ALL TOTAL SING
AMS
REMAIN SACD
RNDM TRK
A
B
1
1
TEXT
2 34 56 7891011 12 1314 1516 1718 1920
STEREO
SOUND MODE
Button
SA7001N_01_Eng 05.11.14, 5:30 PMPage 9 Adobe PageMaker 6.5J/PPC
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SA7001 KI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SA7001 KI in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info