769600
25
Zoom out
Zoom in
Previous page
1/42
Next page
Phones
The headphones circuit operation can be stopped to
minimize noise from the headphones circuit which could
interfere with the analog audio output signal.
On
(Default):Enable the headphones output.
Off: Disable the headphones output.
0When not using headphones, you can enjoy higher quality
sound with Off mode.
HP AMP Gain
Set the gain of the headphone amplifier. Set this according to
the impedance of the connected headphones. It is
recommended that this is set on the “Low” side if the
headphones have low impedance and on the “High” side if
they have high impedance.
Low
(Default):
Set the gain of the headphone
amplifier to “Low”.
Middle:
Set the gain of the headphone
amplifier to “Middle”. Set this if the
volume is too low at the factory
default setting.
High:
Set the gain of the headphone
amplifier to “High”. Set when there
is insufficient volume, even when
the gain setting is “Middle”.
NOTE
0The headphone volume varies depending on the “HP AMP
Gain” setting. Decrease the volume or mute the audio first
if changing this setting while listening to audio.
Resume Play
When the playback media mode is switched, the USB
memory device is disconnected and then connected, or the
power is turned off and then back on during USB memory
device playback, the unit memorizes the point where
playback stopped (resume information) so that playback can
resume from the beginning of that track.
On
(Default):Resume playback is set.
Off: Resume playback is not set.
NOTE
0Resume playback works even if the USB memory device is
disconnected and then reconnected. However, if a
different USB memory device is connected, the resume
information for the previous USB memory device is
deleted.
0The resume information may be deleted when the USB
memory device is removed and files are added or deleted.
0Press 2 while playback is stopped to delete the resume
information. “Resume Off” is displayed.
0Resume information is not recorded when the power is
turned off by pressing X during USB memory device
playback.
AutoStandby
Sets whether to automatically switch the unit to the standby
mode when the unit remains in the stop mode for more than
30 minutes.
On
(Default):Enable Auto Standby mode.
Off: Disable Auto Standby mode.
Timer Play
This unit can perform timer play by cooperating with your
timer device.
(“Connecting the timer device” (v p. 10))
On:
Timer play is set. Select the
playback media mode to be used
for timer play.
Off
(Default):Timer play is not set.
nUsing the timer play function
1. Turn on the power of the connected components.
2. Load a disc or connect a USB memory device.
3. Switch the media mode of this unit to the media to be
played using the timer.
4. Switch the amplifier’s function to input from the connected
unit.
5. Set the audio timer for the desired times.
6. Turn the timer on.
The power of the components connected to the timer turns
off.
When the set time is reached, the power of the different
components automatically turns on and playback starts
from the first track.
NOTE
0For connection to audio timer and it’s operation, please
refer to the instruction manual of your audio timer.
0The timer play does not support the random playback,
repeat playback or program playback.
ENGLISH
24
Overview Connections Playback Settings Tips Appendix
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SA-12 SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SA-12 SE in the language / languages: English as an attachment in your email.

The manual is 1.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz SA-12 SE

Marantz SA-12 SE User Manual - German - 42 pages

Marantz SA-12 SE User Manual - Dutch - 42 pages

Marantz SA-12 SE User Manual - French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info