513679
24
Zoom out
Zoom in
Previous page
1/34
Next page
21
ENGLISH
Specifying the desired sound quality
This unit is equipped with a sound quality adjusting function
which allows users to enjoy the desired playback sound quality.
•This setting remains effective even if the power is turned off.
Noise shaper function
Digital feedback is used to improve the low-sound linearity and
the noise characteristics of the audible band.
Although no difference is observed in the measured values,
the sound quality is changed, allowing users to specify a
favorite sound quality.
Press NOISE SHAPER.
•The setting switches between on and
off each time the button is pressed.
•When on, the “N SHP” indication
lights on the display.
NOTE
The noise shaper function is disabled during playback of a 32
kHz sampling frequency source.
DC filter function
This filter is effective in preventing excessive speaker vibration
when playing discs where audio with extremely low noise
characteristics has been recorded. (The cut frequency is set
at 1.7 Hz.)
Press DC FILTER.
•The setting switches between on and
off each time the button is pressed.
•When on, the “DCF” indication lights
on the display.
NOTE
The DC filter function is disabled during playback of a 32 kHz
sampling frequency source.
Switching the filter characteristics
2 filter characteristic types can be selected for Super Audio CD
playback, and for audio CD playback. The 2 filter characteristics
types are explained below.
Filter
Type
Audio CD Super Audio CD
FIL 1
Offers a short impulse
response for both pre-
echo and post-echo.
Suitable for large-
information-content
audio. Produces a
deep sound image
with clearly-defined
positional relationships
of the audio sources.
This is a direct mode
in which there is no
filtering versus the DSD
data (Super Audio CD
recording signal). The
original source data is
reproduced as it is, along
with the original texture
and space.
FIL 2
This filter offers
asymmetrical impulse
response. The post-
echo is slightly longer
than the pre-echo.
Resembles analog
sound quality.
DSD data exceeding 100
kHz is attenuated. Also
equipped with DACs
for normal-phase and
inverted-phase signals (23
each). The asymmetrical
DAC operation gives
priority to the resolution,
resulting in a smoother
sound.
Press FILTER.
•The setting cycles through the 2
modes (FIL 1 / FIL2) and off as shown
below each time the button is pressed.
FIL 1 FIL 2
NOTE
The noise shaper, DC filter, and filter characteristics have a last
memory function. These settings remain in memory even if a
disc change occurs, or if the power is turned off.
1.SA-11S3U_ENG_0525.indd 21 2012/05/25 20:09:07
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SA-11S3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SA-11S3 in the language / languages: English as an attachment in your email.

The manual is 7,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz SA-11S3

Marantz SA-11S3 User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info