161710
23
Zoom out
Zoom in
Previous page
1/30
Next page
20
ENGLISH
OPERATION
MAKING YOUR FAVORITE AUDIO
SETTINGS
The settings can be made using the remote control. The
settings are retained even if the power is turned off so that you
can always enjoy tracks with your favorite characteristics.
To change the settings again, make the changes using the
same procedure. The settings can be changed when the track
is stopped.
7 Playing the CD layer of an audio CD or
Super Audio CD
q Noise shaper operation
In this unit, you can select noise shaper on or off for
playing tracks.
The noise shaper is turned on and off by pressing the
NOISE SHAPER
button while the track is stopped.
When turned on, the NSHP indicator lights up on the
LCD.
* Noise shaping is a type of digital feedback used in
the algorithms for oversampling. Digital feedback
improves the linearity of bass sounds and the noise
characteristics of the audio frequency band. However,
this digital feedback is still feedback nonetheless.
Generally, in amplifiers and other equipment, the sound
quality changes based on the amount of feedback. Low
feedback is said to result in poor audio characteristics
but good sound.
Although no measurement differences are shown in the
unit, the sound quality is changed. Therefore, make the
setting according to your preferences.
w DC filter operation
The DC filter is turned on and off by pressing the
DC FILTER
button while the track is stopped. When
turned on, the DCF indicator lights up on the LCD.
The DC filter is effective when the speakers vibrate
abnormally for discs with recorded audio having extremely
low noise characteristics. (The cutoff frequency is set to
1.7Hz.)
e Digital output off operation
The digital output function is turned on and off by pressing
the
DIGITAL OUT
button while the track is stopped.
When digital output is turned off, the D OFF indicator
lights up on the LCD.
When digital output is not used, setting to digital output
off enables you to enjoy better sound quality.
Note:
The noise shaper, DC filter, and digital output off have
a memory retention function where the settings remain
stored and unchanged even when the disc is changed or
the power is turned off.
TURNING OFF THE DISPLAY AND
ILLUMINATION (DISPLAY OPERATION)
This function is used to turn the LCD and illumination lamps
(blue) on and off. (Two display statuses are available.)
1. Mode where LCD and illumination lamp (blue) turn on
Each time the
DISPLAY
button is pressed during
playback, the LCD and illumination lamp (blue) switch on
and off.
When Display Off is set, the Display Off indicator (red)
lights up.
When any related button is pressed (such as when the
OPEN/CLOSE
button,
STOP
button, or
button is used), the display is automatically turned on,
but the Display Off indicator (red) remains lit. If a track is
started in this state, the display is automatically turned
off two seconds later.
When a track is stopped, the Display Off indicator (red)
and illumination lamp (blue) light up alternately.
2. Setting for turning on only LCD (illumination lamp (blue)
remains off)
In the default state, the illumination lamp (blue) is lit. In this
state, the illumination lamp (blue) remains off regardless
of whether the LCD is turned on or off.
Changing procedure (Changes can be made when
operation is stopped.)
q If playback is in progress, press the
STOP
button
to stop playback. To make the setting, hold down the
DISPLAY
button for at least two seconds from the
remote control.
w If the illumination lamp (blue) is lit, it is turned off and is
set off. To change the setting from off to on, hold down
the same operation
DISPLAY
button for at least two
seconds to turn on.
The illumination lamp (blue) off setting is retained even
when the power is turned off, and this setting remains
until the setting is changed to the on setting.
The LCD display on/off setting is not retained when the
power is turned off. (This enables you to enjoy operation
each time you use it.)
SA-11S2_N_01_Eng.indd 20SA-11S2_N_01_Eng.indd 20 07.8.8 9:35:06 AM07.8.8 9:35:06 AM
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz sa 11 s2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz sa 11 s2 in the language / languages: English as an attachment in your email.

The manual is 3,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz sa 11 s2

Marantz sa 11 s2 User Manual - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info