699718
32
Zoom out
Zoom in
Previous page
1/46
Next page
n
Display on this unit shows nothing
Symptom Cause / Solution Page
Display is off.
0
Press the DISPLAY button, and change the setting to
“On”.
11
n
No sound comes out
Symptom Cause / Solution Page
No sound is produced. Or sound is
distorted.
0
Check the connections for all devices.
8
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check the amplifier’s functions and controls and adjust as necessary.
0
When connecting to a device with digital audio input connectors, set “Digital Out
” to “On”.
12
0
Digital audio output stops when playing the HD layer of a Super Audio CD or a file with a DSD signal or a linear PCM signal with a
sampling frequency of 352.8 kHz or higher.
0
If using headphones, check that “Phones” is set to
“On” in the menu. Sound is not output through the headphones jack if “Off” is set.
26
n
Sound is interrupted or noise occurs
Symptom Cause / Solution Page
During playback from the CD-R/CD-RW/
DVD-R/DVD-RW/DVD+R/DVD+RW,
sound is occasionally interrupted.
0
The sound may skip during playback of a CD-R/CD-RW containing a high-resolution audio source.
0
This may be caused by poor recording conditions, or the disc itself may be of poor quality. Use a correctly recorded disc.
During playback from the USB memory
device, sound is occasionally
interrupted.
0
When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted.
Sound is interrupted during playback of
tracks saved on a computer.
0
Do not start applications other than the player software while playing music on your computer.
0
The sound may be interrupted depending on the hardware or software configuration of the computer being used.
n
Desired sound does not come out
Symptom Cause / Solution Page
Headphone volume is low.
0
Switch “HP AMP Gain
” to “Middle” or “High” if using headphones with high impedance or low sensitivity.
26
n
The phase of the audio is inverted
Symptom Cause / Solution Page
The phase of the audio is inverted.
0
Check the phase of the connected device and adjust the phase. Set
“Phase” in the menu to set the balanced output phase. It is
recommended to keep the original setting (“Normal”) when using an unbalanced connection.
27
ENGLISH
31
Printing : Color : Black
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SA-10 in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz SA-10

Marantz SA-10 User Manual - English - 16 pages

Marantz SA-10 User Manual - German - 45 pages

Marantz SA-10 User Manual - Dutch - 45 pages

Marantz SA-10 User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info