699718
27
Zoom out
Zoom in
Previous page
1/46
Next page
Dither
Dither is used to avoid artifacts of digital signal processing.
Side effect of dither is that Signal/Noise ratio is slightly
reduced or artifacts do not completely disappear. Set as
desired.
Dither 1
(Default):
This is a Marantz developed dither
that reduces digital artifacts while
reducing SNR only very little.
Dither 2:
Classic dither that reduces all
artifacts but also reduces SNR.
Off:
Highest SNR but digital artifacts
may slightly influence soundstage
or colorate the sound.
NOTE
0
The Dither function does not work when playing a Super
Audio CD or DSD audio source.
NoiseShaper
Improves linearity and noise characteristics in the audible
range using digital feedback. The following degrees and
methods can be set. The measurements are the same but the
sound quality changes. Set as desired.
3rd-1
(Default):
This is the best compromise
between highest signal to noise
ratio and most open and detailed
sound stage.
3rd-0:
This gives high SNR for natural
instruments but may reduce some
resolution.
4th-1:
4th order improves the SNR but this
cost resolution in sound stage.
Highest possible dynamics for
wideband music content in this
setting.
4th-0:
Even higher SNR but only up to 5
kHz. This gives highest possible
dynamics for natural instruments
and voices.
NOTE
0
The NoiseShaper function does not work when playing a
Super Audio CD or DSD audio source.
Phones
The headphones circuit operation can be stopped to
minimize noise from the headphones circuit which could
interfere with the analog audio output signal.
On
(Default):
Enable the headphones output.
Off: Disable the headphones output.
0
When not using headphones, you can enjoy higher quality
sound with Off mode.
HP AMP Gain
Set the gain of the headphone amplifier. Set this according to
the impedance of the connected headphones. It is
recommended that this is set on the “Low
” side if the
headphones have low impedance and on the “High” side if
they have high impedance.
Low
(Default):
Set the gain of the headphone
amplifier to
“Low”.
Middle:
Set the gain of the headphone
amplifier to
“Middle”.
High:
Set the gain of the headphone
amplifier to
“High”.
NOTE
0
The headphone volume varies depending on the
“HP AMP
Gain” setting. Decrease the volume or mute the audio first
if changing this setting while listening to audio.
ENGLISH
26
Overview Connections Playback Settings Tips Appendix
Printing : Color : Black
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SA-10 in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz SA-10

Marantz SA-10 User Manual - English - 16 pages

Marantz SA-10 User Manual - German - 45 pages

Marantz SA-10 User Manual - Dutch - 45 pages

Marantz SA-10 User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info