User Guide
44
Recording A Macro Step By Step
Note To record a macro, there must be at least one macro group in
the Macro menu. To create these groups, see page 35-40. Read
the instructions for Adding Device Groups (see page 35-36),
then note the differences when Adding Macro Groups (see page
39).
1 Tap the Macro menu button .
2 Open the macro menu and select a macro group.
3 Switch to Edit mode via the Mode button .
Empty macro buttons appear in the macro control panel.
4 Tap the button you want to use for your macro.
5 Enter the sequence of commands you want to record.
You can navigate to whatever control panel you want, just as
you do in Use mode.
6 Tap the Macro menu button.
The contents of the macro appear. You can now play, edit or
close the macro.
7 Press the Left button to close the macro.
A confirmation screen appears where you can save or cancel
the macro.
Delay - A delay counts as one of the
255 macro steps. Delays can be
adjusted in 1/10th of a second
intervals to be any value between .1
second and 99.9 seconds.
Adjusting Delays - When a delay is
“Selected,” you can adjust the delay
with the plus and minus buttons.
Reference
