22851
8
Zoom out
Zoom in
Previous page
1/27
Next page
ENGLISH
DOLBY HX PRO HEADROOM EXTENSION
The Dolby HX PRO system monitors the total amount
of effective bias during recording and instantaneously
compensates for any excess bias by reducing the
deck’s bias signal level accordingly. The system
operates independently on each channel. HX PRO is
unlike a noise reduction system because it functions
only during recording and no decoding is required.
Therefore a tape recorded with the HX PRO system
can be played back on any other cassette deck while
retaining the benefits of HX PRO.
- 8 -
FRONT PANEL CONTROLS
AND DISPLAYS
Power switch button
Push the POWER switch in to turn power to the
unit on and off. When power is turned off, all past
settings are removed from memory and the unit
returns to its default setting upon the next power
up.
EJECT button
Press the eject button to open the cassette tape
holder. The EJECT button will not function unless
the tape deck is in the stop mode. Thus, if the
power is turned off without hitting the STOP
button, the door may not open.
CASSETTE TAPE HOLDER
This section holds the cassette tape for tape Play
and Record functionality. Tapes that have the
record protect knock-out removed will not enter
into the record mode.
TAPE PITCH control
Rotate the TAPE DECK pitch control to adjust the
tape deck playback pitch from -12% to +12%.
While the control is in the center detent position,
the tape deck is at normal (0% pitch variance)
speed. This control has no effect on the tape
pitch during the record mode.
DISPLAY
See next section for description of display
elements.
TAPE COUNTER buttons
The MEMO button 6 and RESET button 7
control the tape counter (DISPLAY a ). The tape
counters are only approximate measurements of
minutes and seconds and are not intended for
timing-critical applications. They are most accu-
rate with 60 minute tapes.
1
MEMO button
Press the MEMO button to store a memory point
into the counter memory. Once this point is set,
the tape deck will rewind or fast forward until it
reaches this point in the tape and will stop. To
cancel the memory control, press the MEMO
button again.
RESET button
Press the RESET button to reset the current tape
counter reading from its existing point to “0000”
DUBB button
Press the DUBB button to engage the tape
transport into the dubbing mode from the CD
player. Once the DUBB button is pressed, the
CD player will copy directly to the tape deck.
REC indicator
Displayed when the tape deck is in the Record
mode. When the REC indicator is flashing, this
indicates the tape deck is in the Record Pause
mode.
REC/PAUSE button
Press the REC/PAUSE button to engage the
tape transport into the record pause mode. In this
mode, the tape deck is armed to begin recording.
The tape record mode can be engaged by
pressing the forward play or reverse play but-
tons.
IR sensor
Sensor for receiving infrared remote control
signals. Model RC330 IR control emitter is
available from Marantz Professional.
TAPE DECK AND CD PLAYER CONTROLS
2
3
4
5
6
7
8
9
10
11
12
TAPE
PLAY PAUSE
STOP
PLAY
PLAY
TAPE DECK CONTROL buttons
REWIND button
Press the REWIND button to engage the
tape transport into fast rewind mode from the
right (take-up) to the left (supply) reels.
a
a
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz PMD351 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz PMD351 in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info