522808
10
Zoom out
Zoom in
Previous page
1/12
Next page
ENGLISH
7
HOW TO USE THE REMOTE CONTROL UNIT
1. Remote control unit
The distance between the signal transmitter of the remote con-
trol unit (RC8100PM) and the IR SENSOR of the integrated
amplifier (PM8200) should be less than about 5 meters. To en-
sure remote control, the remote control unit should be pointed
accurately toward the IR SENSOR and there should be no ob-
stacle between the remote control unit and the IR SENSOR.
Remote controllable range
Stereo integrated amplifier (PM8200)
Remote control unit (RC8100PM)
2. Loading batteries
The service life of the batteries used in the remote control unit
is about 1 year under normal use.
Remove the batteries when the remote control unit is not to be
used for a long period of time. Replace batteries early when-
ever they seem to be weakened.
(1) Remove the back cover.
(2) Insert batteries with correct and polarity.
(3) Slide close the battery cover until it clicks.
Improper use of batteries may cause the risk of fluid leakage
or explosion.
Be specially careful in the following points.
1. Insert the batteries with the correct and polarity as
indicated inside the battery case.
2. Do not use a brand-new battery and used battery together.
3. Dry cell batteries may produce different voltages even
when their shapes are the same. Do not use different types
of batteries together.
4. Some batteries are rechargeable and some are not. Be
sure to read the caution and instructions described on each
battery.
5. Used batteries should be disposed of in compliance with
the treatment method specified for your local area.
UM-3/AA
Approx.5m
TROUBLESHOOTING
In case of trouble with the unit, first check the following before
calling for service. What seems to be a serious malfunction is
often due to a simple operation mistake.
If the trouble still persists after checking, please consult your
dealer or nearest MARANTZ service agent.
The amplifier does not work and the indicator does not light.
1. Check if the power cord is plugged properly into an AC
power outlet.
The indicator lights but the amplifier will not function.
1. Check the settings of the INPUT SELECTOR switch, VOLUME
control and SPEAKERS switches.
2. Check the MUTE function is deacivated. (The MUTE indi-
cator is OFF.)
Sound is produced only from one of the speaker systems.
1. Check the setting of the BALANCE control.
2. Turn power of the set off and change the connections of
the left and right speaker systems. If sound is still not output
from the same speaker system, check its connection cord
or the speaker system itself.
Sound is not produced at all.
1. Check the settings of the INPUT SELECTOR switches.
2. Check the SPEAKERS switches is pressed in.
3. Check that the speaker cords are connected properly.
4. Check that the connection cords with RCA pin plugs are
connected properly.
5. Check the MUTE function is deacivated.
Sound from the analog turntable is not output or very noisy
(hum noise).
1. Check that the connection to the PHONO jacks is made
properly.
2. Connect the grounding wire of the turntable to the GND
terminal on the rear panel of the amplifier set. If it has al
ready been connected, try removing it.
3. Check that the cartridge is attached properly to the tone
arm.
4. Remove the power plug of the turntable from the power
outlet and insert it again by inverting the relationship of the
left and right blades with respect to the power outlet slots.
60°
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz PM8200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz PM8200 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info