453880
15
Zoom out
Zoom in
Previous page
1/20
Next page
9
Getting started
Basic connections Troubleshooting Specifications IndexAdvanced connections Advanced operation Explanation terms
ENGLISH
Basic operationBasic connections
1
Use either <INPUT SELECTOR> or [INPUT d,f] to
select an input source you want for playback.
The input indicator for the selected source lights.
GSelectable sourcesH
PHONO
TUNER
CD
AUX/DVD
RECORDER-1
RECORDER-2
•You can also select an input source by pressing the Input selector
buttons of the remote control.
•The input source you select is stored in memory even after you turn
off power, and the same source is selected when power is turned
on again.
2
Press <SPEAKERS A/B> to select the speaker system
to be used for playback.
The indicator for the selected speaker system lights.
3
Start playing back the source.
4
Adjust the VOLUME to the desired level.
n Adjusting the tone
• <BASS> Adjusts the bass sound.
• <MID> Adjusts the midrange sound.
• <TREBLE> Adjusts the treble sound.
• <BALANCE> Adjusts the left and right output balance.
Direct playback using a source audio
component
Since the audio signals bypass the tone control circuits (BASS/MID/
TREBLE/BALANCE), the music reproduction is more faithful to the
original sound.
Press
SOURCE DIRECT.
The SOURCE DIRECT indicator lights.
To adjust the tone, turn off SOURCE DIRECT.
Muting sound
This function mutes the sound by stopping audio output.
Press [MUTE]
.
The MUTE indicator lights.
•To cancel the mute operation, press the button again.
You can also cancel the mute operation by operating VOLUME of
the remote control.
Using headphone set
Plug headphones into PHONES jack.
•To listen with headphones, turn speaker output OFF.
n Adjusting the volume
Adjust the VOLUME to the desired level.
NOTE
To prevent hearing loss, do not raise the volume level excessively
when using headphones.
Starting Recording
1
Use either <INPUT SELECTOR> or [INPUT d,f] to
select the input source you want to record.
2
Set the recorder to recording mode.
3
Start playback of the source you want to record.
•Recording will start in sync with the playback operation of the
source.
Starting playback
Advanced connections
Connecting P.DIRECT connectors
If you use a preamplifier, connect it as shown below, and then you
can use this unit as a power amplifier.
To switch the POWER AMP DIRECT mode, press and
hold <POWER AMP DIRECT> for at least 3 seconds.
•Switching <POWER AMP DIRECT> “ON”, allows the device
connected to the Power Amp Direct connector on the rear panel to
be played. When ON, the input indicator turns off.
•Switching <POWER AMP DIRECT> “OFF”, allows the program
source selected using the INPUT SELECTOR knob to be played.
When OFF, the input indicator lights up.
For details on operations of the preamplifier, refer to the instruction
manual supplied with the preamplifier to be used.
w qw q
(R) (L)
L
R
L
R
Pre-amplifier
To PRE OUT
connectors
Speaker
(L)
Speaker
(R)
NOTE
•When the POWER AMP DIRECT is “ON”, adjustment of the
volume, balance and tone on the main unit has no effect. Adjust the
volume on the input device.
•When the POWER AMP DIRECT is “ON”, the main unit outputs
at maximum volume. Check the output level on the input device
before playing it and adjust the volume accordingly.
Advanced connections
1.PM-KI PEARL LITE_N_ENG_0617.indd 9 2010/06/21 19:18:32
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz PM7004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz PM7004 in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz PM7004

Marantz PM7004 User Manual - German - 12 pages

Marantz PM7004 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info