522804
18
Zoom out
Zoom in
Previous page
1/28
Next page
14
ENGLISH
PLAYBACK
To explain how to play back input sources, representative
examples are given with an Super Audio CD player and analog
record player. Before starting either procedure, check the
component is correctly connected to the PM-15S1.
77
77
7 Disc Playback on an Super Audio
CD Player
1. Press the power ON/OFF switch of the Super Audio CD
player to activate power to it.
2. Press the POWER ON/OFF switch q of the PM-15S1 to
activate power to it. Approximately 8 seconds after power
has been activated, the muting turns OFF and audio output
is enabled. When using multiple PM-15S1s connected by
FCBS, turn power ON in the order of lowest to highest ID
number, starting from ID 1.
3. Select the input source from the INPUT SELECTOR knob
e on the PM-15S1 or the input selector buttons z of the
remote controller.
4. To use the speakers connected to the SPEAKER
SYSTEMS terminals, press the SPEAKERS button !0 on
the PM-15S1.
5. Load a disc into the Super Audio CD player and press the
play button to start playback.
6. Adjust the volume level from the VOLUME knob r on the
PM-15S1 or the VOLUME 3/4 buttons n of the remote
controller.
7. Adjust bass/treble as desired from the BASS and TREBLE
knobs t. Be sure to first set the TONE button o on the
PM-15S1 or the TONE button v on the remote controller
in the ON position.
8. You can turn the display and side illumination ON/OFF as
suited for the room environment. Press the DISPLAY button
i on the PM-15S1 or the DISPLAY button m of the remote
controller.
77
77
7 Disc Playback on an Analog
Record Player
1. Press the POWER ON/OFF switch q of the PM-15S1 to
activate power to it. Approximately 8 seconds after power
has been activated, the muting turns OFF and audio output
is enabled. When using multiple PM-15S1s connected by
FCBS, turn power ON in the order of lowest to highest ID
number, starting from ID 1.
2. Select PHONO as the input source from the INPUT
SELECTOR knob e on the PM-15S1 or the input selector
buttons z of the remote controller. To prevent unexpected
accidents, it is recommended to set the volume level to
(mute) by turning the VOLUME knob r until muting the
volume level.
3. Set the PHONO MC button !3 on the PM-15S1 to MC or
MM according to the cartridge you are using.
4. To use the speakers connected to the SPEAKER
SYSTEMS terminals, press the SPEAKERS button !0 on
the PM-15S1.
BASIC OPERATION
5. Set a record on the analog record player and play it.
6. Adjust the volume level from the VOLUME knob r on the
PM-15S1 or the VOLUME 3/4 buttons n of the remote
controller.
7. Adjust bass/treble as desired from the BASS and TREBLE
knobs t. Be sure to first set the TONE button o on the
PM-15S1 or the TONE button v on the remote controller
in the ON position.
8. You can turn the display and side illumination ON/OFF as
suited for the room environment. Press the DISPLAY button
i on the PM-15S1 or the DISPLAY button m of the remote
controller.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz PM15S1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz PM15S1 in the language / languages: English as an attachment in your email.

The manual is 10,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info