570950
7
Zoom out
Zoom in
Previous page
1/13
Next page
6
English
English
RECORDER OPERATION
Control used for operating the tape deck.
PLAYBACK
1. Set the INPUT SELECTOR switch
AA
AA
A to MD/TAPE or CD-R.
2. Play a prerecorded disc or tape on the recorder.
3. Adjust the volume with the VOLUME control
BB
BB
B.
4. Adjust the tone with the BASS and TREBLE controls
CC
CC
C.
RECORDING
The playback sound of a program source component, such as a
turntable, a tuner, or a CD player, can be recorded on disc or tape
as follows.
1. Set the INPUT SELECTOR switch
AA
AA
A to the program source
to be recorded.
2. Play the program source.
3. Operate the recorder(s) to record the playback sound on
disc(s) or tape(s).
Using REC SELECTOR switch
The REC SELECTOR switch is used when copying a recorded
disc or tape to another disc or tape, or recording a CD onto a
recordable disc or cassette tape.
1. When the switch is in the OFF position, the signal is not output
at the REC OUT jacks.
It is not necessary to output the signal at the REC OUT jacks
when the signal is not recorded onto disc or tape.
By setting the switch to OFF, the signal path inside the unit can
be shortened and crosstalk, etc., can be reduced.
2. In the SOURCE position, the signal selected with the INPUT
SELECTOR switch can be recorded onto disc/tape.
3. In the COPY positions, the MD/TAPE signal can be recorded
onto CD-R or vice versa.
4. In the COPY position, the program source selected with the
INPUT SELECTOR switch can be monitored through the
speakers.
OPERATION PROCEDURES
Operate each equipment to start play.
TO PLAY AN ANALOG DISC
1. Set the INPUT SELECTOR switch q to PHONO.
2. Play a disc on the turntable.
3. Adjust the volume with the VOLUME control w and adjust the
tone with the BASS and TREBLE controls e.
NOTES:
¡ Set the VOLUME control to the minimum position before
placing the stylus on the disc or before replacing the cartridge.
¡ Do not apply shock or vibration to the turntable during play, as
this may cause the stylus to jump and the analog disk to be
damaged.
¡ If the turntable is installed too close to the speakers, the
volume may not be able to be increased to a high level due to
howling.
¡ Do not switch the power OFF while the stylus is on the disc
surface.
TO LISTEN TO FM/AM BROADCASTS
1. Set the INPUT SELECTOR switch q to TUNER.
2. Tune in the desired station on the tuner.
3. Adjust the volume with the VOLUME control w and adjust the
tone with the BASS and TREBLE controls e.
TO PLAY A DVD OR COMPACT DISC
1. Set the INPUT SELECTOR switch q to CD.
2. Play a CD on the CD player.
3. Adjust the volume with the VOLUME control w and adjust the
tone with the BASS and TREBLE controls e.
TO PLAY A DVD OR COMPONENT CONNECTED TO AUX
JACKS
The component connected to the AUX jacks on the rear panel
can be played as follows.
1. Set the INPUT SELECTOR switch q to AUX.
2. Play the component connected to the selected input.
3. Adjust the volume with the VOLUME control w and adjust the
tone with the BASS and TREBLE controls e.
INTEGRATED AMPLIFIER PM4200
PHONO CD TUNER AUX/DVD CD-R MD/TAPE
MUTETONE DEFEAT
MIN
VOLUMEINPUT SELECTOR
PHONESPOWER ON/OFF STANDBY
ON
OFF
ON
OFF
LOUDNESS
ON
OFF
AUX/DVDCOPY
TUNER
CD-R
MD/TAPE
CD
MD/TAPE
CD-R
PHONOSOURCE
REC SELECTOR
OFF
BASS TREBLE
1
2SPEAKERS
+ +
MAX BALANCE
LR
INTEGRATED AMPLIFIER PM4200
PHONO CD TUNER AUX/DVD CD-R MD/TAPE
MUTETONE DEFEAT
MIN
VOLUMEINPUT SELECTOR
PHONESPOWER ON/OFF STANDBY
ON
OFF
ON
OFF
LOUDNESS
ON
OFF
AUX/DVDCOPY
TUNER
CD-R
MD/TAPE
CD
MD/TAPE
CD-R
PHONOSOURCE
REC SELECTOR
OFF
BASS TREBLE
1
2SPEAKERS
+ +
MAX BALANCE
LR
REC SELECTOR
AUX/DVDCOPY
TUNER
CD-R
MD/TAPE
CD
MD/TAPE
CD-R
PHONOSOURCE
REC SELECTOR
OFF
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz PM-4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz PM-4200 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info