0Check that speaker cables are properly connected.8
0Adjust the left and right channel balance.17
The left and right of stereo sound is
reversed.
0Check whether the left and right speakers are connected to the correct speaker terminals.8
nSound is interrupted or noise occurs
SymptomCause / SolutionPage
When playing a record, the sound is
distorted.
0Adjust to a proper needle pressure.－
0Check the tip of the needle.－
0Replace the cartridge.－
When playing a record, a humming
noise comes out of the speakers.
0Check that the turntable is connected correctly.9
0If there is a TV or AV device near the turntable, such devices may affect the playback sound. Install the turntable in a location as far
away as possible from the TV or other AV devices.
－
When playing a record, a humming
noise comes out of the speakers when
the volume is high. (Howling
phenomenon)
0Install the turntable and speakers as far from each other as possible.9
0The vibrations from the speakers are being transmitted to the player through the floor. Use cushions, etc., to absorb the speakers’
vibrations.
－
Audio sources recorded through this unit
are distorted.
0If two recording devices are connected to this unit, turn on the power of both recording devices when recording. If the power of only
one recording device is turned on, the recording device that is turned off may cause distortion of the audio recorded to the other
recording device, depending on the type of recording device.
18
Error messages
When multiple PM-12 SE units are connected by F.C.B.S., the error messages described in the table below may be displayed on the display. In such a case, ID number setting or remote cable
connection may be in failure. Check the ID number or remote cable connection, referring to the table below. For details on ID number setting, see “How to set ID number for F.C.B.S.” (v p. 11).
IndicationMeaningCause / Solution
ERROR 02Multiple amplifiers take ID No.2.0Assign different ID numbers to the amplifiers.
ERROR 03Multiple amplifiers take ID No.3.
ERROR 04Multiple amplifiers take ID No.4.
ERROR 11The amplifiers with ID No.2-4 cannot communicate with the amplifier with ID No.1.0If the amplifier with ID No.1 is not on, turn it ON.
0Check that the remote cable is properly connected.
ERROR 12The amplifier with ID No.1 cannot communicate with the amplifiers with ID No.2-4.0If multiple amplifiers take ID No.1, set ID numbers properly.
0If the amplifier with ID No.1 is connected to the amplifier with ID No.0, set ID
numbers properly.
0Check that the remote cable is properly connected.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Marantz PM-12 SE at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Marantz PM-12 SE in the language / languages: English as an attachment in your email.
The manual is 0.88 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
