6528
25
Zoom out
Zoom in
Previous page
1/29
Next page
21
ENGLISH
ENGLISH
HOW TO ADJUST DISPLAY CONTRAST
An LCD is used as the PM-11S1s display. You can set the
contrast in the +8 - -8 range. When the PM-11S1 is shipped
from the factory, the contrast level is set to 0. The contrast
adjustment mode is accessed by activating power from the
POWER ON/OFF button while pressing and holding the
DISPLAY button. Contrast is then set by turning the INPUT
SELECTOR knob to the desired setting.
1. While pressing and holding the DISPLAY button, press the
POWER ON/OFF button.
2. Turn the INPUT SELECTOR knob to the desired contrast
setting.
3. When finished setting the display contrast, turn power to
the PM-11S1 OFF. The setting is stored in memory and
becomes active the next time power to the PM-11S1 I
activated.
HOW TO USE AND SET FEATURES
HOW TO SET ID
If using the PM-11S1 by itself as a stereo amplifier, set the ID
to 0. When the PM-11S1 is shipped from the factory, the ID is
set to 0.
When the ID is set to a number other than 0, the PM-
11S1 cannot be used for standalone operation.
The ID number of the PM-11S1 appears on the display for
about 3 seconds after power is activated.
When multiple PM-11S1s are connected, a unique ID number
must be set for each one in order to distinguish between them.
The PM-11S1 that centrally controls the other PM-11S1s takes
ID 1. The PM-11S1 with ID 1 is called the master. The other
PM-11S1s that synchronize with the master are called slaves
and take IDs 2 - 4. ID numbers must not be the same for
any two units.
Set ID numbers as follows.
1. While pressing and holding the DISPLAY button, press the
POWER ON/OFF button.
2. Press the DISPLAY button once.
3. Turn the INPUT SELECTOR knob to the desired ID number.
When finished setting the ID number, turn power to the PM-
11S1 OFF. The setting is stored in memory and becomes active
the next time power to the PM-11S1 activated.
INTEGRARED AMPLIFIER PM-11S1
POWER ON/OFF
PHONES
A
TONE
SPEAKER
B
SPEAKER
OPERATE
DISPLAY
SELECTOR
INPUT
INPUT SELECTOR knob DISPLAY button
POWER ON/OFF button
PM-11S1N ENG(P09-P26)A4 04.8.17, 11:37 PMPage 21 Adobe PageMaker 6.5J/PPC
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz PM-11S1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz PM-11S1 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info