669257
19
Zoom out
Zoom in
Previous page
1/32
Next page
Turning off the sound temporarily
(Muting)
1
Press MUTE.
“ATT” appears on the display and the sound is muted.
0
To cancel mute, press MUTE again.
n
Setting the attenuation level when
sound is muted
The attenuation level can be set at –20 dB, –40 dB, or –∞.
0
The factory default setting is –∞.
1
Press and hold MUTE for 2 seconds or longer.
The attenuation level will appear on the display.
2
Press MUTE.
The attenuation level setting value changes each time
the button is pressed.
0
If not operated for 2 seconds, the current setting is saved
and the display returns to normal.
Adjusting the left and right channel
balance
The volume level of the left and right channels can be
trimmed in 0.5 dB steps across a 0.0 9.0 dB range.
The factory default setting is 0.0 dB (maximum).
1
Press MODE/TRIM.
The unit enters the level adjustment mode.
0
The left channel level value flashes.
2
Use ui to adjust the left channel level.
3
Press p.
The adjustment mode selects the right channel.
0
The right channel level value flashes.
4
Use ui to adjust the right channel level.
5
Press MODE/TRIM.
The unit exits the adjustment mode.
0
If you have connected a “SLAVE” device using the
F.C.B.S. connection (v
p. 11), proceed to the
slave setting.
Having the display and the
illumination lamp off
The display circuit operation can be stopped to minimize
noise from the display and the display circuit which could
interfere with the analog audio output signal.
1
Press DISPLAY.
Each time you press DISPLAY, the display and the
illumination lamp (blue) switch on/off at the same time.
0
If you operate the VOLUME knob or another control when
the display is off, the display turns on again. When
operation is finished, the display turns off automatically
after approximately 2 seconds.
Having the illumination lamp always
off
The following procedure makes the illumination lamp always
off regardless of the display on/off operation.
1
Press and hold DISPLAY for two seconds and
longer while display is lighted.
Press and hold DISPLAY for two seconds and longer
while the lamp is always off to return to the normal
setting.
ENGLISH
18
Overview Connections Playback Settings Tips Appendix
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz PM-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz PM-10 in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz PM-10

Marantz PM-10 Quick start guide - English - 10 pages

Marantz PM-10 User Manual - German - 32 pages

Marantz PM-10 User Manual - Dutch - 32 pages

Marantz PM-10 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info