669257
13
Zoom out
Zoom in
Previous page
1/32
Next page
n
How to set ID number for F.C.B.S.
When the unit is turned on, the display shows the ID
number for three seconds.
For a master unit, ID number 1 needs to be assigned.
For a slave unit, set any of ID numbers 2 to 4.
.
INPUT
SELECTOR
X
F.C.B.S. ID
1
While holding F.C.B.S. ID on the rear panel,
press X.
2
Turn INPUT SELECTOR on the unit to select
an ID number.
3
Turn the unit off.
4
Again turn the unit on.
0
The setting is saved.
0
The unit registered as a slave shows “SLAVE” on the
display.
NOTE
0
If using this unit by itself as a stereo amplifier, set the ID
number to “0” (Default setting is “0”).
0
If the ID number is set to a number other than “0”, this unit
cannot be used for standalone operation.
Stereo complete bi-amp connection
This mode enables the two amplifiers connected to this unit
to function as one monaural amplifier. To use this mode, two
F.C.B.S. connected PM-10 units are required.
To switch the mode, use the AMPLIFIER MODE switch on
the rear panel while the power is off.
The figures below show example displays in the stereo and
bi-amp modes.
.
Stereo mode
Bi-amp mode
Bi-amp mode indicator
In bi-amp mode, connect to the left channel input jack. The
right channel input is disabled.
The same signals are output from the left and right speaker
terminals.
NOTE
0
Always turn the power to the unit OFF before changing the
operating mode switch setting. Turning the power ON
again activates the new setting.
0
When in bi-amp mode, the R channel input jacks cannot be
used.
0
When in bi-amp mode, the signals input into the L channel
are output from both channels. Therefore, the same signals
are output from the L channel and R channel in
RECORDER OUT, headphones jack.
0
Speaker systems connected using complete bi-amp
connections must support bi-amp connections. Before
connecting your speakers, check in the instruction manual
that came with the speakers or contact the manufacturer to
confirm whether they support bi-amp connection.
ENGLISH
12
Overview Connections Playback Settings Tips Appendix
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz PM-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz PM-10 in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz PM-10

Marantz PM-10 Quick start guide - English - 10 pages

Marantz PM-10 User Manual - German - 32 pages

Marantz PM-10 User Manual - Dutch - 32 pages

Marantz PM-10 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info