453906
41
Zoom out
Zoom in
Previous page
1/50
Next page
NAMES AND
FUNCTIONS
37
BASIC
CONNECTIONS
BASIC
OPERATION
ADVANCED
CONNECTIONS
SETUP
ADVANCED
OPERATION
TROUBLESHOOTING
OTHERS
TROUBLESHOOTING
ENGLISH
Symptom Cause Solution
Page
Cannot receive
AM or FM signals.
The antennas have not been
connected properly.
Make sure the AM and FM
antennas are properly connected to
the AM and FM antenna terminals,
respectively.
12
A noise is
generated when
receiving an AM
signal.
The unit is receiving interference
from other equipment.
Change the location of the AM
antenna.
12
A noise is
generated when
receiving an FM
signal.
The signal from the broadcasting
station is weak.
Install an outdoor FM antenna. 12
TUNER
WHEN MALFUNCTIONING
HAS OCCURRED
If an abnormal display or malfunction display
appears on the unit's display, turn off the power
immediately.
If the trouble persists even after the power has been
turned back on, disconnect the AC power cord.
Then contact the dealer where you purchased the
unit, your nearest Marantz sales offi ce or Marantz
service center.
MEMORY BACKUP
Even when the unit's main power is off, the various
settings that have been selected will remain stored
in the non-volatile memory inside the unit.
TO RESTORE THE DEFAULT SETTINGS
(RESETTING)
If the trouble cannot be resolved even by following
the instructions in the “TROUBLESHOOTING”
sections, try resetting the unit.
However, bear in mind that resetting the unit will
cause all the information on the settings selected on
the setup menu and on the surround mode settings
to be erased from the memory.
MENU 4
1. Check that the power is on.
2. While pressing the unit’s MENU button,
hold down the 4 cursor button for at least
3 seconds.
After “M-CLEAR” has appeared on the
display, the STANDBY mode is established,
the settings that were selected are initialized,
and the default settings are restored.
TROUBLESHOOTING
Symptom Cause Solution
Page
No sound is heard
from the monitor
TV connected
to the HDMI
terminal.
OFF has been set for HDMI
AUDIO OUT on the SYSTEM
SETUP menu.
No sound is heard from the
monitor TV in the OFF mode.
Select ON.
19
Image and audio
are unstable
over an HDMI
connection.
(There is noise,
the stream is
interrupted, etc.)
The connection uses a long cable.
Use a short cable.
Use of a cable no longer than 5
meters is recommended.
11
Use a Category 2 (high-speed
supported) cable.
11
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz NR1501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz NR1501 in the language / languages: English as an attachment in your email.

The manual is 5,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz NR1501

Marantz NR1501 User Manual - Dutch - 42 pages

Marantz NR1501 User Manual - French - 44 pages

Marantz NR1501 User Manual - Spanish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info