Manual Marantz MS7000 (page 39 of 43) (English)

494222

Zoom out

Zoom in

1/43

GWireless LANH

Symptom Cause Page

Cannot connect to

network.

•The settings of the SSID and network key (WEP) are incorrect.

Match the network settings with this unit settings.

•The reception is poor and the signals cannot be received. Shorten

the distance from the wireless LAN’s access point, remove any

obstacles and otherwise improve visibility, then try reconnecting.

Also install away from microwave ovens and the access points of

other networks.

•There are multiple networks and the usable channels overlap. Set

the access point’s channel settings away from the channels used

for other networks. Alternatively, connect using a network cable.

•The router power is off. Turn on the router power.

–

Cannot achieve

network connection

using the

WPS

button.

•The encryption type on the router is set to “WEP” or “TKIP”.

Set the encryption type to “None”, “WPA-PSK(AES)” or “WPA2-

PSK(AES)” before establishing connection.

–

Played sound is

interrupted or sound

cannot be played.

•There are multiple networks and the usable channels overlap. Set

the access point’s channel settings away from the channels used

for other networks. Alternatively, connect using a network cable.

–

GRemote control unitH

Symptom Cause/Solution Page

The set cannot be

operated with the

remote control unit.

•Batteries are worn out. Replace with new batteries.

•Operate the remote control unit within a distance of about

7 m from this unit and at an angle of within 30°.

•Remove any obstacle between this unit and the remote control

unit.

•Insert the batteries in the proper direction, checking the q and

w marks.

•The set’s remote control sensor is exposed to strong light (direct

sunlight, inverter type ﬂuorescent bulb light, etc.). Move the set

to a place in which the remote control sensor will not be exposed

to strong light.

Resetting the microprocessor

When the microprocessor is reset, all the settings are reset to their default values.

Press FUNCTION repeatedly until “Menu” is

displayed.

•“Menu” is displayed, then “Language” menu appears.

ELECTRONIC GYRO TOUCH

ENTER

FUNCTION

PLAY/PAUSE

Turn GYRO to select “Factory Reset”, then press

ENTER.

ELECTRONIC GYRO TOUCH

ENTER

FUNCTION

PLAY/PAUSE

Factory Reset

Turn GYRO to select “Yes”, then press ENTER.

“Initialized” is displayed and the default settings are

restored.

If “Initialized” does not display in step 3, start over from step 1.

n Exiting the menu to return to the normal mode

Press FUNCTION.

•If you press FUNCTION before pressing ENTER, the setting is cancelled.

How to reset

“Reset” is an operation that restarts this unit.

Perform this procedure if the display is abnormal or if operations cannot be performed.

When the power of this unit is on, insert a thin stick

(

2) into the reset hole (

1), and press the reset

button within this unit.

This unit automatically restarts.

•Prepare a thin stick (such as a toothpick and straightened paper

clip) for pressing the reset button within this unit.

z 1 Thickness (dia.): 0.5 mm – 1.5 mm

z 2 Length: 30 mm or longer

NETLINKWPS

NETWORK

LINE IN

WIRELESS LAN

ON/STANDBY

Preparations

Operations

InformationsInformations

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marantz MS7000 in the language / languages: English as an attachment in your email.

The manual is 9,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz MS7000

Marantz MS7000 User Manual - Dutch - 43 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marantz MS7000 Manual

Product: