571030
14
Zoom out
Zoom in
Previous page
1/24
Next page
FM
MUTING
SWITCH
When tuning
to
FM broadcasts
with
the FM MUT-
ING
Switch in its
"in"
position, the muting
circuit
will
eliminate
inter
-station noise. To prevent
muting
of
very weak stations along
with
the
noise, the
muting
function
may be turned
off
by
releasing the FM
MUTING
pushswitch
to
the
"out"
position.
VOLUME
This
control
regulates volume
of
all
four
channels
simultaneously.
DOLBY
SWITCH
This switch sets the
Dolby
noise-reduction
circuit
for
record or playback and also switches the
Meter Mode
from
AM or FM SIGNAL-STR ENGTH
to
DOLBY
CAL
LEVEL,
or vice-versa. With the
DOLBY
Switch placed in
"OFF"
position, the
Meter
will
be used as a
SIGNAL-STRENGTH
Meter; in all other positions,
as
a
DOLBY
CAL
LEVEL
METER.
DOLBY
FM: This position is used
for
listening
to
Dolbyized FM broadcasts. The
Dolby
FM
level has been pre-adjusted at the factory.
PLAY:
This position is used
to
play back a
Dolbyized source (except FM).
OFF:
With this position, the
Dolby
circuit
IS
by-passed and the
input
signals are
directly
applied
to
both TAPE
MONITOR
OUT
jacks
and amplifiers.
RECORD I: For making a Dolbyized recording
from
an in-coming
"flat"
(non-Dolbyized) signal.
When the
MONITOR
Switch is in the SOURCE
(out) position, the
"flat"
signal
will
be heard.
When the
MONITOR
Switch is in the TAPE (in)
position, the Dolbyized signal
from
the tape
will
be heard.
RECORD
II:
For making a
"flat"
(non-Dolbviz-
ed) recording
from
an in-coming
Dolby
ized signal.
Regardless
of
the position
of
the
MONITOR
SWitch, a
"flat"
signal
will
be heard.
Refer to the
Dolby
Mode Chart on page 16.
RECORD
LEVEL
(L)
(R)
These knobs control the record level
of
the signals
to be recorded through the
Dolby
unit.
Adjust
the knobs so
that
the Level Meter pointers
of
the tape recorder do
not
exceed the OVU level.
PLAY
CAL.
(L)
(R)
These knobs adjust the playback
outputs
from
a
tape deck
to
the proper
Dolby
level.
400Hz
TONE
SWITCH
This is used
for
calibration
of
the record
input
level
of
the tape deck. When the switch is
depressed, the
built
-in oscillator operates and a
sine wave signal
output
of
580mV
will
be applied
to
the
four
TAPE MOI\IITOR
OUT
jacks.
10
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz Model 4270 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz Model 4270 in the language / languages: English as an attachment in your email.

The manual is 13,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info