Operations cannot be performed through the remote control unit
Operations cannot be performed through the remote control unit.
0Batteries are worn out. Replace with new batteries. (v p. 5)
0Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°. (v p. 5)
0Remove any obstacle between this unit and the remote control unit.
0Insert the batteries in the proper direction, checking the q and w marks. (v p. 5)
0The set’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb light, etc.). Move the set to a place in which the
remote control sensor will not be exposed to strong light.
0When using a 3D video device, the remote control unit of this unit may not function due to effects of infrared communications between units (such as TV
and glasses for 3D viewing). In this case, adjust the direction of units with the 3D communications function and their distance to ensure they do not
affect operations from the remote control unit of this unit.
0The remote control code of the volume buttons on the remote control (VOLUME no and :) is set to the mode for operating a Marantz Network
SACD player. If the volume of this unit cannot be adjusted using the remote control, press and hold ENTER and the number 1 button together for 5
seconds or more to change the remote control code to AMP operation mode.
0When the remote control code setting is set to “AMP1” (Default), the INPUT ml buttons on the remote control cannot be used to switch the input
source to “PWR AMP” or switch from “PWR AMP” to another input source. To make remote control operations, change the remote control code setting
to “AMP2” or “AMP3”. (v p. 31)
0The remote control code between this unit and the remote control is different. Set this unit and the remote control to the same remote control code.
(v p. 31)
Display on this unit shows nothing
Display is off.
0Press the DIMMER button, and change the setting to anything other than off. (v p. 28)
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Marantz Model 30 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Marantz Model 30 in the language / languages: English as an attachment in your email.
The manual is 0.88 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
