61654
35
Zoom out
Zoom in
Previous page
1/38
Next page
33
NAMES AND
FUNCTIONS
BASIC
CONNECTIONS
BASIC
OPERATIONS
BASIC
SETTINGS
PRACTICAL
CONNECTIONS
ADVANCED
OPERATIONS
IF YOU EXPERIENCE
PROBLEMS
MISCELLANEOUS
IF YOU EXPERIENCE
PROBLEMS
ENGLISH
IF YOU EXPERIENCE PROBLEMS
RADIO OPERATIONS
Symptom Possible Cause Resolution
Cannot select a broadcast station
by preset number.
The unit has lost all preset
information.
Register the broadcast station
again.
There is a lot of noise when
listening to an FM broadcast.
The signal of the broadcast station
being tuned is weak or reception is
poor in your area.
1. Change the orientation of the
antenna.
2. Try setting the FM stereo to FM
mono. (Page 22)
3. Change the FM antenna to a
commercially available outdoor
antenna.
Cannot automatically select FM
broadcast stations.
The signal of the broadcast station
being tuned is weak or reception is
poor in your area.
1. Change the orientation of the
simple antenna.
2. Try setting the FM stereo to FM
mono. (Page 22)
3. Change the FM antenna to a
commercially available outdoor
antenna.
Cannot automatically select AM
broadcast stations.
The AM loop antenna is not
connected correctly.
Connect the loop antenna correctly.
The signal of the AM broadcast
station is weak.
Refer to how to manually register a
broadcast station. (Page 21)
Display says “Station not available”.
Ensure that DAB coverage exists in
your area.
Check that antenna is connected.
I can not access Secondary
services.
At the time of publishing this
manual not many Secondary
services are available, this will
increase as more DAB stations start
broadcasting.
If a Secondary service station
is available, the SECONDARY
indicator will be displayed next to
the station name.
I hear a burbling sound on some
stations.
DAB like other digital media is good
at producing quality audio from a
low level signal, however if this
signal, level is too low a “burbling”
sound can sometimes be heard.
Use the unit’s “Tuning aid” while
repositioning your antenna to get
the maximum signal strength and
reduce this noise.
OPERATING EXTERNAL EQUIPMENT
Symptom Possible Cause Resolution
Audio from the external inputs
(AUX1 to AUX3) is not emitted.
The connections to external devices
are incorrect.
Refer to connecting external
devices. (Page 9)
The external device is not in play
mode.
Be sure to play media according to
the manual for the external device.
The input source is incorrect. Check the input source.
The audio volume of the external
device is low.
Increase the audio volume of the
external device.
The headphone jack has been
mistaken for the AUX1 jack.
Check the connector being used for
the connection.
Noise is being emitted from an
external device.
The cable being used to connect to
external is not connected securely.
Check cable connections.
M-CR502_T_DAB_01_ENG.indd 33M-CR502_T_DAB_01_ENG.indd 33 09.2.4 1:35:43 PM09.2.4 1:35:43 PM
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz M-CR502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz M-CR502 in the language / languages: English as an attachment in your email.

The manual is 7,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info