61654
24
Zoom out
Zoom in
Previous page
1/38
Next page
22
NAMES AND
FUNCTIONS
BASIC
CONNECTIONS
BASIC
OPERATIONS
BASIC
SETTINGS
PRACTICAL
CONNECTIONS
ADVANCED OP-
ERATIONS
IF YOU EXPERIENCE
PROBLEMS
MISCELLANEOUS
ADVANCED
OPERATIONS
ENGLISH
ADVANCED OPERATIONS
2. Select a frequency that can be received using
the 1/2 buttons on the unit or the TUNING
3/4 buttons on the remote controller and
then press the ENTER button.
3. Select the preset number in which to
register the station using the 1/2 button or
the numeric keys on the remote controller,
and then press the ENTER button.
Note:
Press the ENTER button within 4 seconds after
selecting the preset number. Registration is
canceled if the ENTER button is not pressed within
4 seconds.
CALLING UP REGISTERED BROADCAST
STATIONS
1. Call up a preset number using the /§
buttons on the unit or remote controller.
Registered stations can also be called up
using the numeric keys on the remote
controller.
DELETING REGISTERED PRESET NUMBERS
1. Preset numbers can be erased by calling
up the number you want to erase and then
pressing the 7 button on the unit.
2. If you want to erase all preset numbers, be
sure to hold down the 7 button on the unit
for 3 or more seconds.
NAMING REGISTERED BROADCAST
STATIONS
Note:
Names can only be given to AM and FM broadcast
stations.
2. 5. 3. 3. 3.
1. Call up the broadcast station you want to
give a name to.
2. Press the MODE button on the unit.
3. Specify the name using alphanumeric
letters (A to Z) and numbers (0 to 9) using
the 1/2 buttons and confirm using the
ENTER button.
Select the space located between “Z”
and “0” to enter a space.
• Press the 7 button on the unit to erase
the last character entered.
Hold down the 7 button on the unit for 3
or more seconds to erase all characters.
4. Repeat Steps 1. through 3. about until
you have entered all characters.
5. Register the name by pressing the MODE
button.
FM RECEPTION MODE
When FM is selected as the tuner band, it may
sometimes be difficult to receive broadcasts in
stereo when the signal is weak. In such cases,
be sure to switch the FM reception mode to
mono. This will help alleviate noise and make the
frequency easier to listen to.
1. 2. 3.
2. 3.
2. 3.
1.
1. Press the MODE button on the unit for 3 or
more seconds or the SET UP button on the
remote controller.
2. Select “FM STEREO/MONO” from the
menu by pressing the 1/2 buttons on the
unit or the VOLUME buttons on the remote
controller and then press the ENTER
button.
3. Select “MONO” using the 1/2 buttons
on the unit or the VOLUME buttons on
the remote controller and then press the
ENTER button.
The default setting is STEREO.
Note:
FM reception mode settings can only be made when
the FM band is selected for the tuner.
M-CR502_T_DAB_01_ENG.indd 22M-CR502_T_DAB_01_ENG.indd 22 09.2.4 1:35:37 PM09.2.4 1:35:37 PM
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz M-CR502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz M-CR502 in the language / languages: English as an attachment in your email.

The manual is 7,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info