61654
14
Zoom out
Zoom in
Previous page
1/38
Next page
12
NAMES AND
FUNCTIONS
BASIC
CONNECTIONS
BASIC
OPERATIONS
BASIC
SETTINGS
PRACTICAL
CONNECTIONS
ADVANCED
OPERATIONS
IF YOU EXPERIENCE
PROBLEMS
MISCELLANEOUS
BASIC
OPERATIONS
ENGLISH
1. 2.
2.
1.
PLAYING THE PREVIOUS TRACK
1. Start playback from the beginning of the
track currently being played by pressing
the button during playback.
2. If you want to play to the track before the
current track, move to the previous track
by pressing the button two times in
succession.
PLAYING THE NEXT TRACK
1. Play the next track by pressing the §
button during playback.
2. If you want to play tracks even further
ahead of the current track, the track number
changes equal to the number of times the
§ button is pressed.
Selecting a track number using the
numeric keys on the remote controller
will automatically play that track.
Press the numeric keys on the remote
controller in succession to select a track
number equal to or greater than 10.
For example, press 1 followed by 8 on
the remote controller if you want to listen
to track 18. Note that playback starts
from track 1 if 8 is not entered within 3
seconds after having entered 1.
FAST FORWARD AND RAPID REWIND
It is possible to quickly fi nd the part of a track you
want to listen to.
The audio volume output by the speakers is
reduced during fast forward/rapid rewind.
RAPID REWIND
Hold down the button on the unit or the 5 button
on the remote controller during playback until you
nd the track section you want to listen to. Start
playback by releasing the button when you fi nd the
section you want to listen to.
FAST FORWARD
Hold down the § button on the unit or the 6 button
on the remote controller during playback until you
nd the track section you want to listen to. Start
playback by releasing the button when you fi nd the
section you want to listen to.
LISTENING TO AM/FM BROADCAST
Before listening to a radio broadcast, be sure to
check that the AM and FM antennas are properly
connected to the unit.
1.2.
1.
2.
BASIC OPERATIONS
1. Select FM or AM as the input source using
the INPUT button on the unit or the TUNER
button on the remote controller.
Note:
When changing the input source to FM or AM using
the INPUT button on the unit, be sure to put the
remote controller into TUNER mode by pressing its
TUNER button.
AUTOMATICALLY SELECTING A STATION
2. Holding down either of the 1/2 buttons
on the unit or either of the TUNNING 3/4
buttons on the remote controller for more
than 1 second automatically selects the
frequency of the next receivable station in
the direction indicated.
3. “TUNED” lights on the display panel while
receiving a broadcast station.
“STEREO” lights on the display panel
while receiving a stereo broadcast on an
FM channel.
MANUALLY TUNING A BROADCAST STATION
2. Adjust to the frequency of the broadcast
station you want to listen to by pressing
either of the 1/2 buttons on the unit or
either of the TUNING 3/4 buttons on the
remote controller.
3. “TUNED” lights on the display panel while
receiving a broadcast station.
Notes:
• Be sure to select “FM MONO” on the SETUP
menu if there is a lot of noise on the FM broadcast
station. (See page 22)
Be sure to use an external antenna to receive FM
broadcast stations with a weak signal.
M-CR502_T_DAB_01_ENG.indd 12M-CR502_T_DAB_01_ENG.indd 12 09.2.4 1:35:31 PM09.2.4 1:35:31 PM
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz M-CR502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz M-CR502 in the language / languages: English as an attachment in your email.

The manual is 7,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info