61654
9
Zoom out
Zoom in
Previous page
1/38
Next page
7
NAMES AND
FUNCTIONS
BASIC CONNEC-
TIONS
BASIC
OPERATIONS
BASIC
SETTINGS
PRACTICAL
CONNECTIONS
ADVANCED
OPERATIONS
IF YOU EXPERIENCE
PROBLEMS
MISCELLANEOUS
BASIC
CONNECTIONS
ENGLISH
BASIC CONNECTIONS
CONNECTING SPEAKERS
Notes:
Always be sure to use speakers having the
impedance speci cations listed on the unitʼs rear
panel.
• To prevent damage to the circuit, do not allow
speaker wires to come in contact with each other
or with metallic parts of the unit.
CONNECTING SPEAKER CABLES
1. 2.
3. 4. 5.
1. Strip approximately 10 mm of insulation
from the ends of the speaker cables.
2. Tightly twist the exposed strands of speaker
wire in order to prevent shorting.
3. Turn the speaker terminal counterclockwise
to loosen the terminal.
4. Insert the exposed part of the speaker cable
into the hole on the side of the speaker
terminal.
5. Turn the speaker terminal clockwise to
tighten the terminal.
CONNECTING A SUBWOOFER
Be sure to use the audio output terminal for a sub-
woofer on the unit when connecting to a powered
sub-woofer (a sub-woofer with built-in powered
amp).
For details on making connections, see the
instruction manual for your sub-woofer.
• Do not touch speaker terminals when the power is
ON as there is a risk of electric shock.
• Do not connect more than one speaker cable to
one speaker terminal as there is risk of damage to
the unit.
• Make certain that the polarity is correct when
connecting to the speaker terminals. If the
polarity is incorrect, the signal phase will become
inverted and the music being played will sound
unnatural.
SETTING SPEAKER OUTPUTS
After turning on the unit’s power (See page 11), set
the speaker output for the unit to match the speaker
connections made to terminals A and B.
The default setting is SPKR A.
Note:
Be sure to lower the audio volume before making
speaker settings.
2.
1.
1. Press the SPKR A or SPKR B button to
match speaker connections made to A and
B terminals.
Note:
Once the SPKR A or B button on the remote
controller is pressed, the display returns to normal
after 3 seconds elapse.
2. Press the ENTER button.
The display changes from fl ashing to lit.
Sub-woofer with built-in amp
Input terminals
RL
M-CR502_T_DAB_01_ENG.indd 7M-CR502_T_DAB_01_ENG.indd 7 09.2.4 1:35:29 PM09.2.4 1:35:29 PM
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz M-CR502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz M-CR502 in the language / languages: English as an attachment in your email.

The manual is 7,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info