699725
20
Zoom out
Zoom in
Previous page
1/25
Next page
18
ENGLISH
SETTINGS
SETTING THE VIEWING/
LISTENING DISTANCE
This item is used to set the distance
between the unit and audience.
Hold down the SEAT button on the remote
controller for over two seconds to change
the setting.
Each time you hold down the button for over
two seconds while the viewing/listening
distance indication is displayed in the
display window, the setting switches as
described below.
This item is set to “Approx. 2 m” at the
factory.
2 m or
shorter
Approx.
2 m
2 m or
longer
SEAT button
(Hold down over
two seconds.)
When the distance is shorter than
2 m
When the distance is approximately
2 m
When the distance is longer than
2 m
Notes:
• When the audience is 2.5 m or farther
away from the unit with the viewing/
listening distance set to “2 m or longer, the
stereophonic effect of the speakers may be
reduced.
• When the audience is close 1.5 m or less to
the unit with the viewing/listening distance
set to “2 m or shorter,” the stereophonic
effect of the speakers may be reduced.
SETTING THE
SUBWOOFER OUTPUT
Press the SUBWOOFER button on the remote
controller when you use a commercially
available or optional SW7001 subwoofer with
a built-in amplifier so that the SUB WOOFER
indicator lights. The subwoofer output is
activated, enabling output of low-frequency
sound from the connected subwoofer.
The low-frequency sound from this unit is
adjusted so that it does not overlap with that
from the connected subwoofer.
To turn off the subwoofer output, press
the SUBWOOFER button on the remote
controller once to display the “On” indication
in the display window, then press it again
while the indication is displayed.
The indication in the display window
changes to “OF” and the SUB WOOFER
indicator goes out. The subwoofer output
is set to off and low-frequency sound of the
unit is restored.
This setting is set to “On” at the factory.
SUBWOOFER
button
Lights
When the subwoofer output is set to on
When the subwoofer output is set to off
Notes
Be sure to set the subwoofer output to off
when you do not use an external subwoofer.
Optimum low-frequency sound is only
output from the speakers built in the unit
with the subwoofer output set to off.
You cannot adjust the volume level of the
connected subwoofer with this unit. Adjust
it with the connected subwoofer.
ES7001_N_01_Eng.indd 18ES7001_N_01_Eng.indd 18 07.8.22 10:59:28 AM07.8.22 10:59:28 AM
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz ES7001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz ES7001 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info