699725
7
Zoom out
Zoom in
Previous page
1/25
Next page
5
ENGLISH
NAMES AND FUNCTIONS OF PARTS
wq
uio!0!1!2 yt r e
FRONT PANEL
q ON/STANDBY button
Press this button to turn on the power.
When it is pressed again, the unit goes
into standby mode and the STANDBY
indicator i lights.
w Display window
Normally, the volume level indication (00-
60) is displayed.
e VOLUME + button
Press this button to increase the volume.
Keeping this button pressed increases the
volume successively.
r VOLUME – button
Press this button to decrease the volume.
Keeping this button pressed decreases
the volume successively.
t SUB WOOFER indicator
The indicator lights in green when
subwoofer output is activated by pressing
the SUBWOOFER button on the remote
controller.
The indicator goes out when subwoofer
output is set to off by pressing the
SUBWOOFER button on the remote
controller.
The subwoofer output is set to on and the
indicator is lit as the factory-setting mode.
Note:
Before installing this unit, connect a
commercially available or optional Marantz
subwoofer with a built-in amplifier.
y NIGHT MODE indicator
The indicator lights in green when the
night mode function is activated.
The indicator goes out when the night mode
function is canceled by pressing the NIGHT
MODE button on the remote controller.
Note:
The night mode function can be activated
only when the Dolby D (Digital) indicator
is lit blue.
u MODE indicator
The indicator lights in blue when the
binaural mode is activated. The indicator
goes out when the binaural mode is
canceled by pressing the MODE button on
the remote controller.
Note:
The binaural mode can be set when an
audio source recorded in binaural mode
is played.
i STANDBY indicator
The indicator lights in red when the unit is
in standby mode.
o Dolby PL II indicator
The indicator lights in green when 2-
channel signal is input and the Dolby Pro
Logic
II mode is set to Pro Logic II MOVIE
or Pro Logic
II MUSIC.
When Dolby Pro Logic
II mode is set to
OFF by pressing the Dolby PL
II button
on the remote controller, this indicator
goes out.
!0 Dolby D indicator
When a Dolby digital signal is input, this
indicator lights in blue.
!1 dts/AAC/PCM indicator
The indicator lights in the following colors
according to the format of digital signal
input from the connected equipment:
dts signal: red
AAC signal: yellow
PCM signal: green
The indicator goes out when the A1 or A2
button on the remote controller is pressed
to select an analog input signal.
!2 INPUT SELECTOR button
Press this button to select the input source
to be played.
Each press of the button changes the
indication in the display window as shown
below.
The factory-preset setting is “d1.
A2 (AUX)
A1 (VCR)
H2(HDMI 2)
H1(HDMI 1)
d1(DVD)
d2 (TV)
d3 (GAME)
ES7001_N_01_Eng.indd 5ES7001_N_01_Eng.indd 5 07.8.22 10:59:25 AM07.8.22 10:59:25 AM
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz ES7001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz ES7001 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info