136931
11
Zoom out
Zoom in
Previous page
1/426
Next page
2Connecting Up
11
English
Home theater video connections
This player outputs video in a number of
different ways. Choose the one most suit-
able for your system using the guide below.
Connecting SCART (for Europe
only) and S-Video cables
SCART and S-Video cables will only plug in
one way, so make sure the plug is correctly
lined up with the jack before inserting. Be
sure to fully insert for a good connection.
Note
The A/V EURO CONNECTOR connector can
output composite, S-Video or RGB component
video. If you connect just one TV, use the A/V
EURO CONNECTOR connector. You can select
the type of video output by changing the Video
Out setting in the Setup Menu (page 36).
S-Video or composite video?
S-Video should give a better picture, so if
you have an S-Video input, use it. S-Video
cables are available from any good audio/
visual dealer.
Connecting HDMI cables
With an HDMI cable, both uncompressed
video data and digital audio data (e.g.,
LPCM or bit stream data such as Dolby
Digital, DTS, or MPEG data) can be trans-
mitted with just a single connector.
By transmitting DVD image data directly as
digital data without it being first converted
into analog format, it becomes possible to
provide the very finest in image quality (see
pages 30, 37).
Note
The HDMI output of this unit can be connected
to a DVI jack on a TV or other device using a
conversion adapter. In this case, it is necessary
to use a TV or display with an HDCP-compat-
ible DVI input. (see page 37)
There may be no image output if connected to
a TV or display that is not compatible with the
above format.
•Refer to the instruction manual of the TV or
display to be connected to this unit for detailed
information regarding the HDMI terminal.
•When connecting a progressive input TV with
the component output of the player, select
Progressive in the Components Out setting
(see page 36).
1
3
2
If your TV has a component video input, we
recommend using it to connect directly to the
COMPONENT VIDEO OUT of this player. Use
the standard 3-jack component video ouput.
If a component input is not
available to you, connect this
player to your TV or AV
receiver using either the
VIDEO or S2 jacks.
Plug into a standard
AC wall outlet.
If your TV and projector have a
HDMI terminal for Video and
Audio Input, we recommend
using it to connect directly to
the HDMI out of this player.
If your TV has a SCART input, we
recommend using it to connect directly
to the A/V EURO CONNECTOR on
this player. (for Europe only)
Important
Before making or changing any rear panel
connections, make sure that all components are
switched off and unplugged from the wall outlet.
When connecting the component is turned on,
do not unplug the power cord of this DVD player
from the wall outlet. The speaker may be
damaged.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz dv7600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz dv7600 in the language / languages: English as an attachment in your email.

The manual is 9,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info