49229
26
Zoom out
Zoom in
Previous page
1/32
Next page
26
EN
Choose the appropriate Audio settings for your equipment as it
only affect during the playback of DVD discs of the DVD player.
Press the SETUP button in STOP mode.
Press the Cursor buttons ( s or B ) to select
CUSTOM, then press the ENTER button.
CUSTOM mode will appear.
Press the Cursor buttons ( s or
B ) to select AUDIO, then the
ENTER button to confirm.
Press the Cursor buttons ( K or
L ) button to select the below
items, then press the ENTER button.
DRC (Dynamic Range Control)
(Default : ON)
To compress the range of sound
volume.
DRC function is available only on
the discs that are recorded in the
Dolby Digital format.
DOWN SAMPLING
(Default : ON)
Set to ON when outputting in
48kHz.
This function is available only on
digital outputting of a disc record-
ed in 96 kHz.
When playing disc with copyright protection
The sound will be down sampled at 48 kHz, even if you
set to OFF.
DOLBY DIGITAL
(Default : ON)
Set to ON when the player is con-
nected to Dolby Digital decoder.
ON: Output by Dolby Digital.
OFF: Convert the Dolby Digital
to PCM.
DTS (Default : PCM)
DTS: Output by DTS sound.
Set to DTS when the unit is
connected to DTS decoder.
PCM: Convert the DTS to PCM.
MPEG (Default: PCM)
MPEG: Output MPEG sound.
Set to MPEG when the unit
is connected to an MPEG
decoder.
PCM: Convert the MPEG sound
to PCM.
ANALOG
(Default : 2.0CH)
2.0CH: Output 2ch sound
5.1CH: Output Multi channel sound
Press the SETUP button to exit.
5
QUICK
QUICK
QUICK
4
3
2
1
DVD SETUP
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
MPEG
ANALOG
ON
ON
ON
PCM
PCM
2.0CH
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
MPEG
ANALOG
ON
ON
ON
PCM
PCM
2.0CH
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
MPEG
ANALOG
ON
ON
ON
PCM
PCM
2.0CH
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
MPEG
ANALOG
ON
ON
ON
PCM
PCM
2.0CH
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
MPEG
ANALOG
ON
ON
ON
PCM
PCM
2.0CH
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
MPEG
ANALOG
ON
ON
ON
PCM
PCM
2.0CH
Audio Setting
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
MPEG
ANALOG
OFF
ON
ON
PCM
PCM
2.0CH
AUDIO
2.0CH
5.1CH
ANALOG
Speaker Setting
When 5.1CH is selected for analog out, some speaker set-
tings will be required.
Press the Cursor buttons ( K or L ) to select
5.1CH, then press the ENTER button.
Press the Cursor buttons ( K or
L ) to select the below items,
then press the ENTER button.
SPEAKER SIZE
Press the Cursor buttons ( K or L )
to select the speaker to set.
Press ENTER until the desired
speaker size appears.
FRONT(L/R), CENTER, SURROUND(L/R)
(Default: LARGE)
LARGE:Select this when the connected speaker is
capable of playing back sounds of 100Hz or
less.
SMALL:Select this when the connected speaker is not
capable of playing back sounds of 100Hz or
less.
OFF: Select this when it is not connected. (It cannot
be set OFF on the FRONT speaker.)
SUB WOOFER (Default: ON)
ON: Select this when SUB WOOFER is connected.
OFF: Select this when it is not connected.
NOTES:
•“OFFis not available for SUB WOOFER when
SMALLis selected for FRONT(L/R).
•“SMALLis not available for FRONT(L/R) when OFFis
selected for SUB WOOFER.
When in playback of DVD audio, the sound may not
come out as set due to restrictions in the disc or the
player.
During DVD-Audio playback, the Low Pass Filter (which
filters out the sound with the sound wave frequency
over 100Hz) of the SUB WOOFER will be turned off
with the following speaker setting. Otherwise, the Low
Pass Filter will be turned on.
FRONT(L/R): LARGE
CENTER: LARGE
SUB WOOFER: ON
SURROUND(L/R): LARGE
DELAY TIME
To enjoy 5.1-channel surround sound, the distance between
the listening position and all speakers (excluding the Sub
woofers) should ideally be set at a uniform distance on a cir-
cle. If the speakers cannot be set at this manner, the ideal
listening position can be virtually created with the delay time
setting.
Use the
Cursor buttons ( K or L )
to
select the setting item, then press the
ENTER button.
Press the Cursor buttons ( K or L )
to select the speaker to set, then
press the ENTER button.
DISTANCE (Default : METERS)
METERS(when the ENTER button is pressed):
The unit of distance is set to meters (m).
FEET(when the ENTER button is pressed):
The unit of distance is set to feet (ft).
2
1
AUDIO
SPEAKER SIZE
DELAY TIME
BALANCE
5.1CH
AUDIO
FRONT (L/R)
CENTER
SUB WOOFER
SURROUND (L/R)
SPEAKER SIZE
LARGE
LARGE
ON
LARGE
AUDIO
DISTANCE
FRONT(L/R)
CENTER
SURROUND
DEFAULT
DELAY TIME
METERS
3.0m
3.0m
3.0m
ON
E59M7/M9ED(EN).qx3 04.6.7 9:56 Page 26
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz DV6500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz DV6500 in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info