138914
174
Zoom out
Zoom in
Previous page
1/188
Next page
Additional Information8
Informations complémentaires
174
En/Fr
Cannot listen to high-sampling rate audio through the
digital output.
Linear PCM Out is set to Down Sample On.
Set to Down Sample Off.
As a copy-protection measure, some DVDs do not output
96kHz audio.
In this case, even if Down Sample Off is selected, the player
automatically outputs the audio at 48 kHz. This is not a
malfunction.
No audio, or audio is distorted.
Some DVD discs do not output digital audio.
Switch your amplifier to the player's analog outputs.
Dirt, dust, etc. on the disc.
Clean the disc (page 154).
Interconnects are not fully inserted into the terminals (or are not
connected).
Check that all interconnects are firmly inserted.
Dirty or oxidized plugs/terminals.
Clean the plugs/terminals.
Incorrect audio cable connection.
Check the audio connections (page 32).
Player's output is connected to the amplifier's phono (turntable)
inputs.
Connect to any set of inputs except phono.
The disc is paused.
Press
3
or
8
to exit the pause mode.
Incorrect amplifier settings.
Check that the volume is turned up, that the speakers are on,
the input function set correctly, etc.
• The Audio Out setting is incorrect.
If there is no dialog from the front L/R speakers, set Audio Out
to 2 Channel. If there is no output from the rear, center and
subwoofer speakers, set Audio Out to 5.1 Channel (page
11 4 ).
The player is set to 5.1ch playback, but sound is only 2ch.
Check that 2ch playback is not selected in the disc’s menu.
The analog audio is OK, but there appears to be no digital
audio signal.
Incorrect Audio 1 menu settings.
Make sure that the Digital Out setting is set to On (page 112).
Check that the Dolby Digital and DTS settings are suitable for
your amplifier—check the amp's instruction manual.
Impossible d’écouter des signaux audio à haute fréquence
d’échantillonnage via la sortie numérique.
Linear PCM Out est réglé sur Down Sample On.
Réglez-la sur Down Sample Off.
Par mesure de protection contre la copie, certains DVD ne sortent
pas de signaux audio à 96 kHz .
Dans ce cas, même si l’option Down Sample Off est
sélectionnée, le lecteur sort automatiquement les signaux audio
à 48 kHz. Il ne s’agit pas d’un dysfonctionnement.
Pas de son, ou le son est distordu.
Certains DVD ne sortent pas de signaux audionumériques.
Commutez votre amplificateur sur les sorties analogiques du
lecteur.
Il y a des saletés, de la poussière, etc., sur le disque.
Nettoyez le disque (page 154).
Les interconnexions ne sont pas complètement enfichées dans les
bornes (ou ne sont pas connectées).
Assurez-vous que toutes les interconnexions sont fermement
enfichées.
Les fiches/bornes sont souillées ou oxydées.
Nettoyez les fiches/bornes.
Raccordement incorrect du câble audio.
Vérifiez les connexions audio (page 33).
La sortie du lecteur est connectée aux entrées phono
(tourne-disque) de l’amplificateur.
Raccordez-la à n’importe quel jeu d’entrées sauf l’entreé phono.
Le disque se trouve en mode de pause.
Appuyez sur
3
ou
8
pour quitter le mode de pause.
Réglages incorrects de l’amplificateur.
Assurez-vous que le volume est assez élevé, que les haut-
parleurs sont sous tension, que la fonction d’entrée est
correctement réglée, etc.
Le réglage Audio Out est incorrect.
Si les dialogues ne sont pas diffusés par les haut-parleurs
gauche/droit, réglez Audio Out sur 2 Channel. Si aucun son
n’est diffusé par les haut-parleurs arrière, central et
d’extrêmes-graves, réglez Audio Out sur 5.1 Channel (page
11 4 ).
Le lecteur est réglé en mode de lecture à 5,1 canaux, mais ne
diffuse qu’un son à 2 canaux.
Vérifiez si le mode de lecture à 2 canaux n’est pas sélectionné
dans le menu du disque.
Les signaux audio analogiques sont en ordre, mais il ne
semble pas y avoir de signal audionumérique.
Réglages incorrects du menu Audio 1.
Assurez-vous que l’option Digital Out est réglée sur On (page
11 2 ).
Assurez-vous que les réglages Dolby Digital et DTS sont
adaptés à votre amplificateur—consultez le mode d’emploi de
votre amplificateur.
DV-12S2.4L.168.181 8/6/03, 9:20 PM174
174


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz dv 12 s 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz dv 12 s 2 in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info