138913
86
Zoom out
Zoom in
Previous page
1/92
Next page
ENGLISH
FRANÇAIS
11 Additional Information / Informations complémentaires
83
Picture playback stops and the operation buttons
cannot be used.
Press 7, then start playback again (3).
Switch the power off once, then on again using the front panel
POWER switch.
New settings made in the Setup screen menus while a
disc is playing are ineffective.
Some settings can be changed while a disc is playing, but are
not effective until the disc is stopped then restarted. This is not
a malfunction.
Make the same setting when the player is stopped.
Press 7, then restart playback (3). Note that making settings in
the Setup screen menus may cancel the RESUME function.
Settings are canceled.
When the power is cut due to power failure or by unplugging
the power cord, settings will be canceled.
POWER button on the Remote Control and checking that
STANDBY indicator light in the display, then press POWER on
the front panel to turn the player off.
No picture/No colour.
Incorrect video connections.
Check that connections are correct and that plugs are inserted
fully.
Internal player settings are incorrect.
If using the A/V EUROCONNECTOR or component connections,
make sure that the Video Out setting in the Setup menu
corresponds to the capabilities of the TV or monitor being used
(page 52).
TV/monitor or AV amplifier settings are incorrect.
Check the instruction manual of the connected equipment.
FL menu setting set incorrectly.
If using the component connections, set the FL menu setting to
INTERLACE (page 24-26).
Check that VIDEO ON/OFF switch is set to the correct position.
Screen is stretched or aspect does not change.
The TV Screen setting in the Setup menu is incorrect.
Set the TV Screen option to match the TV/monitor you're using
(pages 52 and 87).
La lecture d’images s’arrête et les touches de
commande sont inopérantes.
Appuyez sur 7 et redémarrez ensuite la lecture (3).
Mettez le lecteur hors tension et puis de nouveau sous tension à
l’aide de la touche
POWER du panneau avant.
Les nouveaux réglages effectués dans les menus Setup
alors qu’un disque se trouve en mode de lecture sont
inopérants.
Certains réglages peuvent être changés pendant la lecture d’un
disque, mais sont inopérants jusqu’à ce que vous ayez arrêté
puis redémarré la lecture du disque. Il ne s’agit pas d’un
dysfonctionnement.
Effectuez le même réglage lorsque le lecteur est à l’arrêt.
Appuyez sur 7 et redémarrez ensuite la lecture (3). Veuillez
noter que les réglages effectués dans les menus Setup peuvent
désactiver la fonction RESUME.
Les réglages sont annulés.
Si l’alimentation est coupée en raison d’une panne de courant
ou parce que le câble d’alimentation a été débranché, les
réglages sont annulés.
Appuyez sur la touche POWER de la télécommande et vérifiez
que l’indicateur STANDBY s’allume sur l’affichage, puis
appuyez sur POWER du panneau avant pour mettre le lecteur
hors tension.
Pas d’image/Pas de couleurs.
Raccordements vidéo incorrects
Vérifiez si les raccordements sont corrects et si les fiches sont
enfoncées à fond.
Les réglages du lecteur interne sont incorrects.
Si vous utilisez des raccordements A/V EUROCONNECTOR ou à
composantes, assurez-vous que le réglage Video Out dans le
menu Setup correspond aux capacités du téléviseur ou moniteur
employé (page 52).
Les réglages du téléviseur/moniteur ou amplificateur AV sont
incorrects.
Consultez le mode d’emploi de l’équipement raccordé.
L’option du menu FL est mal réglée.
Si vous utilisez des raccordements à composantes, réglez l’option
du menu FL sur INTERLACE (pages 24-26).
Vérifiez que le commutateur VIDEO ON/OFF est réglé sur la
position correcte.
L’écran est étiré ou le format ne change pas.
Le réglage de TV Screen dans le menu Setup est incorrect.
Réglez l’option TV Screen en fonction du téléviseur/moniteur
que vous employez (pages 52 et 87).
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz dv 12 s 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz dv 12 s 1 in the language / languages: English as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info