Manual Marantz CR401 (page 24 of 29) (English)

37777

Zoom out

Zoom in

1/29

ENGLISH

OTHER OPERATION

TIMER PROGRAMS

About the Timer Programs

• This unit has three timer programs so that you

can turn it on and off automatically at certain

times and on certain days of the week.

• Timer programs can be set for single operation

(Once) or everyweek operation (Everyweek) or

everyday operation (Everyday) or the days of

the week operation (Weekday).

Timer Program Examples

• The following examples highlight some of the

ways in which you can use the timer programs.

Timer program 1: To wake up to your favorite

radio station every morning, set as follows:

TIMER PROGRAM 1 SET → FM/AM → A1 FM

87.50MHz → EVERYDAY → ON TIME=

7:00AM → OFF TIME= 7:30AM

(If you want a radio alarm only on weekdays,

select “WEEKDAY” instead of “EVERYDAY”

and specify “MON-FRI”.)

Timer program 2: To listen a radio program on

only this Sunday, set as follows:

TIMER PROGRAM 2 SET → FM/AM → B1

AM522kHz → ONCE → SUNDAY → ON

TIME= 9:00PM → OFF TIME=10:00PM

Timer Program Overlap

• If two or three timer programs are set to the

same ON TIME, the timer program with the

lowest number has priority.

For example, if Timer program 1 and Timer

program 2 are both set to an ON TIME of

7:00AM, Timer program 1 has priority and Timer

program 2 is ignored.

Timer program 1: 7:00AM - 1:00PM

(This timer has priority)

Timer program 2: 7:00AM - 0:30PM

If the setting of the two timer program overlaps,

the earlier timer has priority.

Timer program 1: 9:00AM - 10:00AM

Timer program 2: 8:00AM - 10:00AM

(This Timer program has priority)

Timer Program Setting

• You must set the clock time before you set the

timer programs.

• You need to store preset stations before you set

the timer programs.

1. Press the TIMER button x, “TIMER

PROGRAM 1” is displayed.

2. The display changes as follows each time the

Easy JOG 4/¢ knob !5 is turned or the 5

or ∞ button c is pressed.

3. Press the Easy JOG 4 /¢ knob !5 or

ENTER button b to select timer program

number.

4. The display indicate “TIMER PROGRAM x

SET”.

Either turn the Easy JOG 4/¢ knob !5 or

press the 5 or ∞ button c, the display changes

as follows.

• If timer program is already available, to select

“TIMER PROGRAM x CONFIRM” to scroll the

timer setting contents.

• If timer program is already available, to select

“TIMER PROGRAM x ON” to activate the

timer.

• To select “TIMER PROGRAM x OFF” to turn

off the timer program.

5. Press the Easy JOG 4 /¢ knob !5 or

ENTER button b to select “TIMER PROGRAM

x SET”.

TIMER PROGRAM x OFF TIMER PROGRAM x ON

TIMER PROGRAM x SET

TIMER PROGRAM x CONFIRM

TIMER PROGRAM 3

TIMER PROGRAM 1

TIMER PROGRAM 2

The display indicate “TIMER PROGRAM x

FM/AM”. Either turn the Easy JOG 4/¢

knob !5 or press the 5 or ∞ button c, the

display changes “TIMER PROGRAM x FM/AM”.

7. Press the Easy JOG 4 /¢ knob !5 or

ENTER button b to select “CD”, “FM/AM”,

“TAPE”, “MD” or “DVD”.

8. Either turn the Easy JOG 4/¢ knob !5 or

press the 5 or ∞ button c to select Preset

station to be programed.

9. Select the Operation method.

Either turn the Easy JOG 4/¢ knob !5

or press the 5 or ∞ button c to select

operation method “ONCE”, “EVERYWEEK”,

“EVERYDAY” or “WEEKDAY” .

w Press the Easy JOG 4/¢ knob !5 or

ENTER button b to decide the operation.

When you select “ONCE” or “EVERYWEEK”,

you can select the day of the week by turning

the Easy JOG 4/¢ knob !5 or pressing

the 5 or ∞ button c.

When you select “WEEKDAY”, use the

Easy JOG 4/¢ knob !5 or pressing

the 5 or ∞ button c to select the first day,

and then press the Easy JOG 4/¢

knob !5 or ENTER button b.

Use the

Easy JOG 4/¢ knob !5

pressing the

5 or ∞ button c

to select the

last day.

Then press the Easy JOG 4/¢ knob

!5 or ENTER button b.

10.

Set the On time.

q Either turn the Easy JOG 4/¢ knob !5

or press the 5 or ∞ button c to adjust the

hour for the On time and press the Easy

JOG 4/¢ knob !5 or ENTER button

w Either turn the Easy JOG 4/¢ knob !5

or press the 5 or ∞ button c to adjust the

minutes for the On time and press the

Easy JOG 4/¢ knob !5 or ENTER

button b.

11.

Set the Off time.

q Either turn the Easy JOG 4/¢ knob !5

or press the 5 or ∞ button c to adjust the

hour for the Off time and press the Easy

JOG 4/¢ knob !5 or ENTER button

w Either turn the Easy JOG 4/¢ knob !5

or press the 5 or ∞ button c to adjust the

minutes for the Off time.

12.

Set the timer program.

q Press the Easy JOG 4/¢ knob !5 or

ENTER button b to decide the timer

program setting.

Standby indicator lights up green and

setting contents are scrolled.

Notes

• Timer program can activate regardless of power

on or standby mode.

• When timer program is finished, the unit goes to

standby mode.

• When timer program is activated, standby

indicator lights green.

• You can cancel the Timer program setting

procedure at any time by pressing the TIMER

button x.

CR401N_01 Eng 05.11.18 4:55 PM ページ20

can a turntable be connected to this unit? there is no phono input as such nor a ground connection so I'm thinking not; I tried a few of the options with no success Submitted on 27-12-2019 at 12:51
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marantz CR401 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marantz CR401 Manual

Product: