513677
38
Zoom out
Zoom in
Previous page
1/74
Next page
11
Network connections and settings
Using PC to make network settings of this
unit
n When “DHCP” is set to “On” on your router
When using this unit with the broadband router’s DHCP function
enabled, this unit automatically performs the IP address setting
and other settings.
Before turning this unit on, make sure that an Ethernet cable is not
connected to this unit. If a cable is connected, have this unit enter
the power standby mode and disconnect the cable.
1
Press X POWER to turn on power to the main unit.
It takes approximately 30 seconds for this unit to start.
2
Press NETLINK on the rear panel.
This unit restarts and “NetLink” appears on the display.
3
Connect to “Consolette_Setup” in the wireless
network settings on your PC.
•If “Consolette_Setup” is not displayed, refresh the network.
•It may take up to two minutes to establish the connection.
4
Launch the browser on the PC connected to this unit,
and enter the address “http://169.254.1.1”.
5
On the page that appears, set the information
necessary for the network connection.
q Click “Profile Configuration” on the upper left part of the
page.
w From the “Digital Media Player Wireless LAN Settings”
dropdown list, select the SSID (Service Set ID) of your
router.
e Enter the password.
r When settings are completed, click “Apply”.
•“Connecting” is displayed, and the unit starts connecting to the
LAN.
•When the connection is made successfully, “Succeeded” appears.
•If the connection cannot be established, “Failed” is displayed.
Perform steps 1 – 5 again.
•It may take 120 seconds to establish the network connection.
•Enter the name in the “Digital Media Player Name” box and click
“Set” to change the friendly name. A friendly name is the name of
this unit that is presented to the network.
•In “ADVANCE SETTING”, you can manually make settings such as
the IP address.
NOTE
When using PC to make settings, disable the proxy setting in your
browser.
n When “DHCP” is set to “Off” on your router
This section explains the settings when connecting this unit to a
network that does not have a DHCP function.
To configure the settings manually, check the setting details with
your network administrator.
1
Complete steps 1 – 4 in “Using PC to make network
settings of this unit” (vpage 11).
2
On the page that appears, set the information
necessary for the network connection.
q Click “Profile Configuration” on the upper left part of the
page.
w Click “ADVANCE SETTING”.
e Enter required items.
r When settings are completed, click “Apply”.
•“Connecting” is displayed, and the unit starts connecting to the
LAN.
•When the connection is made successfully, “Succeeded” appears.
•If the connection cannot be established, “Failed” is displayed. Turn
this unit off and on.
If this unit is still not connected to the network after this procedure,
complete steps 1 – 2 again.
Preparations
Operations
Informations
Preparations
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz Consolette at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz Consolette in the language / languages: English as an attachment in your email.

The manual is 11,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz Consolette

Marantz Consolette Quick start guide - English - 24 pages

Marantz Consolette User Manual - Dutch - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info