489894
25
Zoom out
Zoom in
Previous page
1/35
Next page
19
ENGLISH
PROGRAMMING
Programmed play
You can program up to 99 tracks to play in any desired se-
quence.
Tracks can be programmed more than once, but each time
counts as a track. (step)
Programming for playback
11
11
1
Select Changer mode or DUAL mode using the
PLAY
MODE
(26).
or appears on the display.
22
22
2
Press
CDR
(27, 78) or
CD
(25,89) to select the required
deck.
Selected key lights up in the display.
33
33
3
Press
PROG
(18, 91) on the remote control to enter Pro-
gram mode.
PROGRAM flashes and appears on the display.
44
44
4
Select the required track numbers by turning the
REC
LEVEL/SELECT
(13) key left or right and store by pressing
PUSH ENTER
(13).
or:
Key in a track number with the
NUMBER
(76). For 2-digit
numbers, press the keys in rapid succession and store by
pressing
PUSH/ENTER
(13) on
ENTER
(84).
The track will be stored in the program.
The track number, total program time and the number of
programmed tracks (steps) are displayed.
55
55
5
Repeat step
33
33
3 and
44
44
4 for all tracks to be programmed.
66
66
6
Press
99
99
9 (5, 87) or
PROG
(18, 91) to end programming.
PROGRAM lights continuously.
77
77
7
Press
22
22
2/
;;
;;
; (6,20) or
2 2
2 2
2 (79) to start programmed play.
The numbers between parentheses refer to the fold-out.
Clearing a program
11
11
1
Press
99
99
9 (5, 87) if necessary to stop programmed play.
22
22
2
Press
99
99
9 (5, 87) again to clear the program.
PROGRAM disappears from the display.
The program is also cleared if you open the disc tray.
Erasing a track from a program
11
11
1
In Stop mode press
PROG
(18, 91) to enter Program
mode.
22
22
2
Use
QQ
QQ
Q (15,81) or
RR
RR
R (17,86) to select the track from
which to delete.
The track number and program step will be shown on
the display.
33
33
3
Press
CANCEL/DELETE
(11,85)
to erase the track from
the program.
The remaining program steps and the remaining playing
time of the program will be displayed.
Programming for recording
11
11
1
Press
REC MODE
(10) to select the required recording
mode (see ‘RECORDING’).
22
22
2
Compile your program as described in “programming
for playback”.
Only tracks from the disc in the CD player can be stored.
33
33
3
Press
00
00
0 (4) to start recording.
Note:
- To review the program, press
PROG
(18, 91), followed by
Q (15,81) or R (17, 86) with the CD player or CD-Re-
corder in stop mode.
- To add more tracks to the program, repeat steps 1 to 5.
- If you try to store more than 99 tracks, ap-
pears on the display.
-
PROG
(18, 91) button is only on the remote control.
CDR500N P15-26 (E) 9/7/00, 5:13 PM19
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz CDR500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz CDR500 in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info