453888
28
Zoom out
Zoom in
Previous page
1/33
Next page
22
BASIC
CONNECTIONS
BASIC
OPERATIONS
ADVANCED
CONNECTIONS
ADVANCED
OPERATIONS
TROUBLESHOOTING
NAMES AND
FUNCTIONS
OTHERS
TROUBLESHOOTING
ENGLISH
USB PLAYBACK
Symptom Cause Solution Page
“OverCurrent” is
displayed on the
display.
The overcurrent protection
function for the USB connector of
this unit was activated.
That USB device is not supported.
Use a USB device whose
operating load current is 500 mA
or less.
“FAT Error” or
“Cluster Err” is
displayed on the
display.
A fi le system not supported
is used. Or, this unit does not
support a USB memory device
whose capacity is 128 MB or less.
Use a USB memory device whose
capacity is more than 256 MB and
has been formatted in a supported
le system (FAT32 or FAT).
24
“No File” is
displayed on the
display.
No fi le exists that can be played
with this unit.
Check the supported formats of
this unit.
23, 24
“DRM Stream” is
displayed on the
display.
The corresponding fi le is protected
by digital-rights management.
Playback is not possible because
the corresponding fi le is protected
by digital-rights management that
is not supported by this unit.
23
“Can'tConnect” is
displayed on the
display.
A device that cannot be recognized
by this unit is connected.
Some fi les stored in USB devices
belonging to a class of USB mass
storage cannot be played back.
(This does not constitute a failure.)
24
It takes substantial
time for reading
data from the USB
device.
It takes substantial time for
reading data if the number of
folders and fi les is large.
Wait until reading is completed.
No sound or
distorted sound.
This unit is used an extension for
the USB cable.
Do not use an extension for the
USB cable.
8
This unit is in disc media play
mode.
Press the DISC MEDIA/USB
button to change to USB device
play mode.
16
The USB device is not fi rmly
connected with this unit.
Firmly connect the USB device
with this unit.
8, 16
The USB device is damaged. Replace the USB device.
The USB device is connected to
this unit via a USB hub.
Do not connect the USB device via
a USB hub.
8
iPod PLAYBACK
Symptom Cause Solution Page
No playback
when an iPod is
connected.
The iPod was in inoperable mode
when it was connected.
Set the iPod to an operable mode
then connect it to this unit.
No sound.
The 5th-generation and earlier
iPods are unsupported.
See “iPod OPERATION”. 24
TROUBLESHOOTING
CD6003_N_01_Eng.indd 22CD6003_N_01_Eng.indd 22 09.5.29 4:00:19 PM09.5.29 4:00:19 PM
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz CD6003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz CD6003 in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz CD6003

Marantz CD6003 User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info