37762
27
Zoom out
Zoom in
Previous page
1/33
Next page
23
ENGLISH
3. After A side program complete, player turns to the pause
state at the beginning of B side program.
4. When A side of the tape ends up, cassette deck inverts
its recording direction and set to rec pause state
automatically.
5. Press 3 or 8 buttons of the player manually to start B side
recording. Player sends out signal to restart recording and
starts playing B side program after 4 seconds.
6. After B side program complete, player stops playing and
clears edit program automatically.
Note:
If the tape ends up before edit program of one side
completes, for example by wrong tape length have
chosen, cassette deck send out signal to player to let
the player cancel the rest of program. Player jumps to
the beginning of B side if it was A side or stop playing
and clear edit program if it was B side.
Synchro recording can be started only when a Marantz
autoreverse cassette deck (ex. SD4050 etc.) with synchro
recording compatibility is connected to the CD player.
Synchro recording is performed through the remote line
connection (rear panel jacks).
Program edit
This procedure allows you to record tracks in any desired
order while fitting the tracks into a specified tape length.
1. Program tracks according to the programming procedure
in section PROGRAM PLAY (page 17).
2. The rest of the program edit procedure is the same as
step 1 to 3 in the simple edit procedure.
Delete program edit
When recording from a disc to a tape, this procedure allows
you to omit the tracks you do not want to record, while fitting
the tracks into a specified tape length.
1. Program tracks according to the delete programming
procedure in the PROGRAM PLAY section (page 19).
2. The rest of the delete program edit procedure is the same
as step 1 to 3 in the simple edit procedure.
Note:
During the simple edit play, program edit play and delete
program edit play, any operations other than the STOP,
OPEN/CLOSE and TIME Display OFF buttons are
disabled. This is intended to prevent mistakes in
recording due to erroneous operation.
While editing, remote control operations are disabled.
The display is always in the time display mode during
edit play. It is not possible to switch to the text display
mode.
Start Edit Recording
Before start editing, connect remote control input of Marantz
cassette deck with remote control output of CD5001 by remote
control cable.
Reverse mode switch may be set to any of one side ( ),
both sides (
) and continuous play ( ).
- Synchro recording with Marantz auto reverse cassette
deck set to both sides ( ) or continuous play ( )
mode.
1. After setting up, setup the cassette deck to rec pause
state.
2. Press 3 or 8 buttons of the player to start A side program.
The player sends out signal to start recording and starts
playing A side program after 4 seconds.
TTL
TRK
TTL
TIME
A
EDIT
TEXT
12 34 56 78 910 1112 1314 15
TTL
TRK
TTL
TIME
B
EDIT
TEXT
16 17 18 19 20
Total number of tracks on side B
Total playing time
of side B
Number indicators of tracks assigned to side B light up.
ADVANCED OPERATIONS
02_CD5001N(ENG2) 05.7.6, 9:07 AMPage 23 Adobe PageMaker 6.5J/PPC
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz CD5001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz CD5001 in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info