ADDITIONAL FUNCTIONS
9
You can fade out and in CD play, e. g. to stop and start a
recording softly.
1 Press FADE during CD play to fade out.
y The display shows in steps. The volume is lowered
continuously until CD play is paused.
2 Press FADE again to fade in.
y The display shows in steps. CD play starts and the
volume is raised continuously to its previous level.
Note: You may use FADE anytime when CD play is paused to
fade in.
The volume of the CD player can be adjusted. This affects the
DIGITAL OUT output as well.
• Press VOLUME – or VOLUME + on the remote control.
y The volume of the CD player is lowered or raised. The
display shows the actual value between VOL MIN
and VOL MAX.
Important!
VOLUME –/+ is altering the signal of the output. Before
recording set the volume to VOL MAX and do not change
during recording.
It is possible to lock the output volume to its maximum. This
affects the DIGITAL OUT output as well. Locking the volume
can be useful when recording from the CD-player.
• Keep EDIT pressed for more than 2 seconds.
If the voulme was unlocked:
y The display shows VOL FIX and the volume is
locked.
If the voulme was locked:
y The display shows VOL MAX and the volume is
unlocked.
Note: If you press VOLUME –/+ and the volume is locked the
display shows VOL FIX.
1 Connect your headphones to the 6.3mm PHONES socket.
2 Press VOLUME – or VOLUME + on the remote control to
adjust the volume (see “Volume adjustment”).
Important!
The volume of the headphones is in line with the volume of the
output. Therefore do not use VOLUME –/+ during recording.
It is possible to listen to the beginning of each track of a CD
or program. You can choose whether to play 10, 20 or 30
seconds of each track.
1 Press SCAN on the remote control repeatedly to switch
through the different scan modes.
y SCAN 10, SCAN 20, SCAN 30, SCAN
OFF… (SCAN OFF aborts the scan function).
2 As soon as the desired scan mode is displayed do not press
the button again.
y After 1 second scanning starts. The number and
remaining time of the actual track, and REM TIME are
displayed.
• You can interrupt scan by pressing PAUSE ;. Continue scan
by pressing PAUSE ; again.
3 Press STOP 9 to stop scanning.
or
• Press PLAY 2 to start CD play with the actual track.
Note: If you press SCAN while SHUFFLE is active, shuffle will
be stopped before scanning.
Scanning the CD
Headphone listening
Locking the volume
Volume adjustment
Fading out and in
English
