139635
18
Zoom out
Zoom in
Previous page
1/56
Next page
13
Connections Connections
ENGLISH
ENGLISH
Introduction Connections Playback Function Setup Others
Press [HDMI RESOLUTION] to select the HDMI output mode. HDMI video resolution changes as
following.
*
1
“480i” and “480p” will be displayed only when an NTSC disc or a1080p/24 frame material is being
played back.
HDMI Output Mode and Actual Output Signals
Front Panel Display HDMI Video Resolution
*
1
480 Interlaced
576 Interlaced
Press [HDMI RESOLUTION]
*
1
480 Progressive
576 Progressive
Press [HDMI RESOLUTION]
720 Progressive
Press [HDMI RESOLUTION]
1080 Interlaced
Press [HDMI RESOLUTION]
1080 Progressive
Press [HDMI RESOLUTION]
1080 Progressive 24 frame
Press [HDMI RESOLUTION]
Source Direct
Press [HDMI RESOLUTION]
Note
You can change the HDMI output mode with [HDMI RESOLUTION] during playback as well. (This
is not available during BD/AVCHD playback.)
Video and audio signals may be distorted temporarily when switching to/from the HDMI output
mode.
You can also change the HDMI output mode from “HDMI Video Resolution” in the “Video” menu
on the setup menu. Refer to page 32.
In order to get natural and high quality film reproduction of 24-frame film material, use HDMI
cable (High Speed HDMI cable is recommended) and select “1080p24”, “Auto” or “Source Direct”
if the connected display device is compatible with 1080p24 frame input.
If the disc contains 1080p24 frame material, 60-frame or 50-frame image will be output unless
“1080p24” is selected.
For AVCHD and DivX
®
, 24-frame film material will be output as 60 frame, even if the connected
device is compatible with 1080p24 frame input and “HDMI Video Resolution” is set to “1080p24”,
Auto” or “Source Direct”.
When “HDMI Video Resolution” is set to “1080p”, “1080p24” or “Source Direct”, the “Component
Output” will be set to “480i/576i” automatically.
If the video is not properly from HDMI OUT jack after you set the “HDMI Video Resolution” setting,
change the HDMI video resolution to the compatible resolution by pressing
[HDMI RESOLUTION] or press and hold B on the front panel for more than 5 seconds to reset
the setting.
“HDMI Deep Color” is available only when the display device is connected by HDMI cable and
supports HDMI Deep Color.
For “Auto” in “HDMI Deep Color”, using the High Speed HDMI cable is recommended.
E5LB0ED_B2ED_EN.book Page 13 Tuesday, June 2, 2009 10:23 AM
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz bd 7004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz bd 7004 in the language / languages: English as an attachment in your email.

The manual is 7,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info