9. Extended operator functions
Menu 4: Operating modes
Menu 5: Function of the direction command transmitter
Menu 6: Function of the impulse command transmitter
OPEN CLOSE
A4 press and hold press and hold
B4 automatic closing press and hold
C4 press and hold automatic closing
D4 automatic closing automatic closing
Direction command transmitters Explanations
A5 not active
The direction command transmitters only give a command
when the gate is stationary.
B5 STOP only
A moving gate is stopped by every direction command
transmitter.
Impulse command transmitters Explanations
A6 not active
The impulse command transmitters only give a command
when the gate is stationary.
B6 STOP only, then standard sequence
A moving gate is stopped by every impulse command
transmitter. The next command starts the drive system
running in the opposite direction
(OPEN - STOP - CLOSE - STOP - OPEN).
Gate movement, OPEN Gate movement, CLOSE
A2 Gate reverses a little
1
Gate reverses a little
1
B2 Gate reverses a little
1
Gate reverses completely
2
C2 Gate reverses completely
2
Gate reverses a little
1
D2 Gate reverses completely
2
Gate reverses completely
2
Menu 2: Closing safety edge device
1
Gate reverses a little: The drive system moves the gate a short distance in the opposite
direction in order to free an obstacle.
2
Gate reverses completely: The drive system moves the gate to the opposite end position.
Operating Instructions, Comfort 580 GB (#91636) 47
