Operating Instructions, Comfort 580 GB (#91636) 21
6. Installation
Advice:
A two-wire photocell connected to
terminals XP62B / XP62A will be
recognised automatically by the
controls after “Mains On”.
The photocell can be deactivated later
(Level 8 / Menu 1).
If the contacts of a closing prevention
device are open, the gate can no longer
be closed.
6.8 Connecting the motor unit to the
controls
6.8 / 1
Advice:
For double wing gate systems, both
motor supply cables must be laid to the
control unit.
6.8 / 2
• Feed the cables from the motor units into the control
unit through the screw fixings.
Attention!
In order to guarantee the protection
grade of the controls, the cable must
be passed through the correct screw
fixing.