743689

Marantec Control 410 Manual

41
Zoom out
Zoom in
Previous page
1/46
Next page
4.7.2 Deadman mode, activate/deactivate (Step 1)
In deadman mode, a roll-up grille, for example, can only be operated by using
the "Open door"/"Close door" direction buttons or via the "Button" input.
The key switch must be set to the black position. When operating the door in
deadman mode, the safety devices connected to the control unit are not
evaluated.
Remote control is not possible. For safety reasons, all the wireless transmitter
program data is deleted when deadman mode is activated, and wireless
transmitters cannot be programmed in.
To activate (the safety LED flashes slowly) or deactivate deadman mode,
press the "Menu" button twice and then press the "Function" button.
52
Operating instructions for Control 410
Installation and initial operation
The "Menu" button is used to select the menus (1 to 4). The "Function" button
is used to select a value or a function (A, B) in a menu.
To call up the menu required, press the "Menu" button repeatedly until the
corresponding LED lights up. Within the menu, parameters are selected in the
same manner. After the last menu item, the control unit returns to the normal
operating state.
We recommend that you follow the sequence described in Chapter 4.1. This
means that the safety devices must always be connected and configured first,
unless the controls are to be used only in deadman mode. The motor running
time can then be programmed and the running time tolerance can be set. The
programming of wireless hand transmitters is the final step in
the configuration process.
Deadman mode activated
A
B
Deadman mode deactivated
41
Installation and initial operation
Operating instructions for Control 410
4.3 Functional units
The following picture shows the circuit board inside the housing. You will need
access to this when installing and configuring the control unit before initial
operation.
Figure 4-1: Functional elements
SAFETY LED
OPERATION LED
OPEN DOOR
button
CLOSE DOOR
button
2.5 AT
Fue 5 x 20
Mains related
connection terminals
Buttons and indicators
for setting the parameters
Connection terminals for safety
Key switch
connection
devices and command devices
reception module
Port for connecting
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Control 410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Control 410 in the language / languages: English, German, Italian as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info