Manual Marantec Control 23 (page 9 of 20) (English)

743222

Zoom out

Zoom in

1/20

3.5.2 Dynamic 3-201 - 3-208

Note / Advice

For setting the cams you need a socket head screwdriver with handle,

width across flats 2,5mm.

3.5.2.1 Setting of end position DOOR CLOSED

• Move the door manually into the mechanical end position DOOR CLOSED.

• Open the case lid of the door operator.

• Loosen the locking device (grub screw (J)) of the switch cam (A).

• Adjust the switch cam A so that the limit switch DOOR CLOSED (G) is operated as

shown in illustration D.1 (position H).

• Fix the switch cam (A) again by tightening the grub screw (J).

• If necessary, adjust the position of the door DOOR CLOSED with the screw for fine

adjustment (K) at the switch cam.

Fig. D/1: Setting of end position DOOR CLOSED

3. Initial operation of the Control 22 / 23 control unit

ABCDEF

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Control 23 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Control 23

Marantec Control 23 User Manual - German - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marantec Control 23 Manual

Product: