743222
5
Zoom out
Zoom in
Previous page
1/20
Next page
5
Insert the mains plug of the control unit into a site electric socket in accordance
with CEE standard 16 A.
Check that the voltage at the electric socket corresponds with that given
on the control unit's data plate and also that its protection category
complies with local requirements.
If the control unit is to be connected directly to the mains, a mains
isolator switch will have to be installed.
For the Control 22: control unit: The rotary field must be of clockwise
rotation.
Operational check of the mains connection
3.1
Selecting 'press-and-release' / 'press-and-hold' operation in the
'OPEN' direction
Via the programming switch S7 (41) the control unit's mode of operation can
be switched from 'press-and-release' to 'press-and-hold' push button operation
in the 'OPEN' direction. With the 'press-and-hold' operation mode, the operator
is started by pressing and holding the 'OPEN' button (11) and stopped by
releasing it again.
For initial operation and the basic settings of the limit switches,
switch the programming switch S7 (41) to the OFF position to programme
press-and-hold operation.
3.2 Connections in the control unit
Connecting the membrane keypad
Connect the system cable for the supplied membrane keypad to the socket X10
(28) in the control unit.
The control unit features a static current circuit. If a malfunction occurs
in any of the safety devices of the door system, the static current circuit
immobilizes power operation of the door.
Elements within this static current circuit are the cable slack switch and wicket
door switch, the cable safety device and the limit switch of the night lock.
3. Initial operation of the Control 22 / 23 control unit
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Control 23 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Control 23 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Control 23

Marantec Control 23 User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info