English / Page 54
8. Connection and Initial Operation of the Accessories
8.1 Remote control
Connection of the electronic aerial
• Connect the electronic aerial to socket X20a (26) in the control unit.
Adapting the control unit to a hand transmitter
See as well 6.2, step 7. Programming of remote control page 32.
In case of power failure the coding remains stored.
Operational check:
• Operate the hand transmitter from a distance of approx. 15 m.
- The door should now start to move
-> If this is not the case, see test instructions 'remote control'.
Advice:
When installing, make sure that the aerial is properly aligned in
order to achieve the best possible range. (Beware of the fact
that metal parts have a shielding effect.)