Manual Marantec Control 121 (page 21 of 36) (English)

742812

Zoom out

Zoom in

1/36

5.4 External photocells

Function: The external photocell monitors the door's through traffic area.

If the closing door encounters an obstruction in this area, it opens again

fully. If the automatic timer is switched on, actuation of the photocell

extends the OPEN phase.

Connecting one photocell Special 613, item no. 153 550

Special 614, item no. 152 675

Special 615, item no. 152 703

Open the cover plate in the control unit and set the programming switch S20 (36)

on the control circuit board to OFF. Connect the photocell to the socket X20 (28)

in the control unit. Cabling of the photocell is carried out as shown below.

Wiring diagram for photocell connection:

Connecting a further photocell

Open the cover plate in the control unit and set the other programming switch

S20a (36) on the control unit circuit board to OFF.

The second photocell is connected to the aerial socket X20a (26). If an aerial is

already connected to this socket, then an adapter (coupling for plug system,

3-pin, item no. 562 849) and a flat cable (item no. 562 759) must be connected in

accordance with the above wiring diagram.

5. Connection and initial operation of the extensions

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Control 121 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Control 121

Marantec Control 121 User Manual - German - 36 pages

Marantec Control 121 User Manual - Dutch - 36 pages

Marantec Control 121 User Manual - French - 36 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marantec Control 121 Manual

Product: