Manual Marantec Comfort ST3024 (page 5 of 48) (English, German, French, Italian, Polish, Portuguese, Spanish)

742802

Zoom out

Zoom in

1/48

4 - PRODUCT INSTALLATION

4.2 - Electrical connections

Insert the supply cable to the terminal. Connect the wires of the supply cable to the terminal following the electrical drawing in Fig. 9.

4.1 - Installation

Before proceeding with the installation, check the integrity of the

product and that all components are present in the package.

Also make sure that the mounting area of the gear motor is compat-

ible with the dimensions (Fig.1).

Ensure that leaf travel is limited, on opening and closing, by mecha-

nical stops securely anchored to the ground.

Check the permitted opening angle, based on the mounting points of

the brackets with the graph (Fig.4).

Fig.3 shows a typical installation:

- Gear motors

- Photocells

- Columns for photocells

- Flashing light with antenna

- Key switch or digital keypad

- Control unit

Installing the rear xing bracket

The xing position of the rear bracket is determined according to the

graph (Fig. 4).

Important: installations where the values of “A” and “B” (Fig. 5) are

as similar to each other as possible are preferred.

If necessary, cut the rear bracket (Fig. 6) to obtain the value “B”, then

weld the xing bracket to the wall.

Secure the bracket to the wall using welding, screws or bolts (not

included).

Installing the front xing bracket

The front bracket must be xed to the door according to dimension

“E” (Fig.5).

Installing the gear motor

Place the gear motor against the rear bracket and insert the xing

screw.

Insert the pin of the sliding bracket into the bush of the front bracket

and secure it with the screw and washer provided.

Tighten the screw on the rear bracket previously mounted with the

nut.

After the installing operations, release the operator and ensure that

the gate opens smoothly with no sti points and that it stops on the

mechanical travel stops obtaining the leaf openings determined by

the tting position of the operator with reference to Fig. 4.

Do not exceed the leaf opening determined by the tting posi-

tion of the operator with reference to Fig. 4, otherwise the ope-

rator may be irreversibly damaged!

ATTENZIONE !

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort ST3024 in the language / languages: English, German, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marantec Comfort ST3024 Manual

Product: