742800

Marantec Comfort RE2224 Manual

4
Zoom out
Zoom in
Previous page
1/52
Next page
4
EN
Code Description
RE2224 24 Vdc gear motor for hinged doors with max length 2,3 m or weight 250 Kg, 230 Vac power supply
RE2224S 24 Vdc gear motor for hinged doors with max length 2,3 m or weight 250 Kg
TECHNICAL DATA
MODELS RE2224 RE2224S
TECHNICAL SPECIFICATIONS
Torque Nm 120 120
Working cycle % 80 80
Opening time at 90° sec 14-20 14-20
Control board CBX20224 -
Power supply Vac 230 -
Power supply Vdc - 24
Absorption A 0,6 2
Engine power W 115 50
Integrated lights - -
Degree of protection IP 44 44
Dimensions (L - P - H) mm 120 - 250 - 350 120 - 250 - 350
Weight Kg 10,5 8
Operating temperature °C -20°+55° -20°+55°
Leaves maximum weight Kg 250 250
2 - PRODUCT OVERVIEW
2.1 - Description of the product
The COMFORT RE gear motors are destined to be installed in
systems for the automation of gates with hinged doors.
The COMFORT RE gear motors have been designed and
constructed to be tted onto hinged doors within the weight limits
indicated in the technical specications table.
The use of gear motors for applications which dier from those
indicated above is prohibited.
2.2 - Model and technical characteristics
3 - PRELIMINARY CHECKS
Before installing this product, verify and check the following steps:
- Check that the gate or door are suitable for automation
- The weight and size of the gate or door must be within the maxi-
mum permissible operating limits specied in Fig. 2
- Check the presence and strength of the security mechanical stops
of the gate or door
- Check that the mounting area of the product is not subject to ood-
ing
- Conditions of high acidity or salinity or proximity to heat sources
could cause malfunction of the product
- Extreme weather conditions (for example the presence of snow,
ice, high temperature range, high temperatures) may increase the
friction and therefore the force required for the handling and initial
starting point may be higher than under normal conditions.
- Check that the manual operation of gate or door is smooth and
friction-free and there is no risk of derailment of the same
- Check that the gate or door are in equilibrium and stationary if left
in any position
- Check that the power line to supply the product is equipped with
proper grounding safety and protected by a magnetothermal and
dierential security device
- Provide the power system with a disconnecting device with a gap
of contacts enabling full disconnection under the conditions dictated
by the overvoltage category III.
- Ensure that all materials used for the installation comply with cur-
rent regulations
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort RE2224 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort RE2224 in the language / languages: English, German, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 3,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info